NEC nec specifications Individual PS Calling

	Individual PS Calling	I-39
I-39	Individual PS Calling

General Description

This service allows the calling party to call the individual Dterm PS series.

Operating Procedure

1.Dial the unique number assigned to each Dterm PS; the designated D term PS will be called. If the calling number display is available, the lower 12 digits of the number are displayed on the LCD of the called Dterm

PS. (The arrow is displayed to show that the upper digits are not displayed.)

2.There are two answering options:

a.) Any-key answering mode

The called Dterm PS user presses any one of the keys (numbers 0 to 9, #, *, or function keys) to answer.

b.) Automatic answering mode

The called Dterm PS is connected automatically without ringing.

Service Conditions

1.The Dterm PS will be called in the calling area where its location had been registered.

2.If the Dterm PS cannot be called as when the Dterm PS user is out of the service area, an announcement can

be provided to the calling party. (The DAT package is required for the caller and called node.) If the called Dterm PS is out of the service area, OUT OF CELL INDICATION is activated.

3.When all the speech channels of the zone transceiver in the Calling Area are busy, either

ANNOUNCEMENT - PS OUT OF CELL or CALL FORWARDING - PS OUT OF CELL is activated, if allowed in the Dterm PS service feature class. If not allowed in the service feature class, the Dterm PS user

receives Reorder Tone.

4.PS AUTHENTICATION is activated for every call termination.

5.The answering options, the any-key answering mode and the automatic answering mode can be selected by the Dterm PS user using the FNC key.

NEAX2400 IPX Wireless Features and Specifications	Page 35
NDA-24313, Issue 1