NEC nec specifications General Service Features

General Service Features

•This service cannot be used with the Central Office line (DIRECT IN TERMINATION) or a call via the Attendant Console.

Note 5: While the Attendant Console is calling a PS, the services associated with Out of Zone such as CALL FORWARDING PS INCOMING CALL INCOMPLETE [C-155], AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE [A-129] and AUTOMATIC ANNOUNCEMENT - DISCONNECTED PS OUT OF ZONE [A-128] are not available.

When an Attendant calls a PS, the individual Attendant number can be displayed on the LCD of the PS. However, “OPR” cannot be displayed on the LCD of the PS.

Note 6: When the PS is assigned as the target station of DIRECT IN TERMINATION (DIT) [D-7]:

•When the PS is Out of Zone (Out of Zone or in POWER OFF state), the calling party hears Ringback Tone.

Besides, if AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE [A-129] is assigned to the PS, the calling party does not hear the Out of Zone Announcement, but hears Ringback Tone instead.

•Even if a PS user moves Out of Zone while the talk between the corresponding PS and a subscriber of the Central Office line is in progress, AUTOMATIC ANNOUNCEMENT - DISCONNECTED PS OUT OF ZONE [A-128] cannot be heard by the subscriber outside, but Busy Tone is heard instead. The caller continues hearing Ringback Tone.

•In a call where a PS is engaged, a third-party intrusion into this line is not available upon the activation of CALL WAITING.

•When a call through DIT is transferred to a PS or a station upon the activation of CALL FORWARDING PS INCOMING CALL IMCOMPLETE [C-155], the calling party hears Ringback Tone if the target PS or station is Out of Zone or in the lock-out state.

•PS is unable to be handed over when it is ringing. When the transceiver zone of the PS changes over, the called PS stops ringing, and the calling party hears Ringback Tone.

•In the FCCS network, PS must be called with Station Number.

Note 7: An incoming call from the Tie Line trunk rings the same as a station call.

Note 8: See STACK DIALING - STATION for the PS feature.

Note 9: PS cannot be used for the Night station.

Note 10: PS can activate this feature only for the Attendant Console.

Note 11: Remote Access to System: Terminating side is PS:

•When the PS is Out of Zone (Out of Area or in POWER OFF state), the calling party encounters Busy Tone, but call termination is not retried.

If the AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE [A-129] is set to the PS, the calling party does not hear Out of Zone Announcement. The calling party hears Busy Tone, but is not allowed to try a call termination again.

•If a PS user moves Out of Zone while talking with a subscriber of the Central Office line, AUTOMATIC ANNOUNCEMENT - DISCONNECTED PS OUT OF ZONE [A-128] cannot be heard by the subscriber outside. Busy Tone is heard.

•When a call activated by REMOTE ACCESS TO SYSTEM is transferred to a certain PS or a station to which CALL FORWARDING PS INCOMING CALL IMCOMPLETE [C-155] is set and when the transferred party is Out of Zone or in the lock-out state, the calling party hears Busy Tone.

•PS is not allowed to be handed over while ringing. When the called PS is ringing with REMOTE ACCESS TO SYSTEM in service and at the same time, its transceiver zone is switched over, the PS stops ringing and the calling party hears Busy Tone.

Note 12: See PRESET DIALING for the PS feature.

NEAX2400 IPX Wireless Features and Specifications	Page 25
NDA-24313, Issue 1