NEAX2400 IPX Wireless Features and Specifications
Page 50 NDA-24313, Issue 1
N-45 Number Sharing
N-45 Number Sharing
General Description
This feature allows the Dterm user to use a PS as a Sub Station. I n this feature, the Dterm and PS are referred as Main
Station and Sub Station, respectively. The main functions of this feature are as follows:
1. Call Forwardin g - All Calls to PS - When the Dterm (Main Station) user presses the feature key or dials the
access code, Call Forwarding - All Ca l ls t o PS (Sub Station) is set or cancelled. This function c a n al s o be
set or cancelled by dialing the access code from the PS (Sub Station).
2. Dterm - Telephone Number Display - Even if a call is connected to the PS (Sub Station), the telephone
number of the Dterm (Main Station) is displayed on the other party’s LCD.
3. Billing Information - Even if a call is originated f rom the P S (Sub Stat ion), b illi ng informati on is re corded
as a call origination from the Dterm (Main station).
4. Voice Mail Indication - Even if a call is tran sferred from the PS (Sub Stati on) t o the Voice Mail System,
the voice mail is recorded on the mail box of the Dterm (Main Station). The system controls Message
Waiting Indication on both the Dterm (Main Station) and PS (Sub Station).
Operating Procedure
To set from the Dterm
1. While in idle state, press the feature key for this feature. The PS Transfer lamp lights on the Dterm (Main
Station).
2. All the calls to the Dter m (Main Station) are forwarded to the PS (Sub Station).
To cancel from the Dterm
1. While the Sub Station Transfer lamp lights, press the feature key for this feature. The PS Transfer lamp
goes off on the Dterm (Main Station).
2. This feature is cancelled.
To set from the PS
1. While in idle state, dial the access co de for th is feature and rece ive Serv ice Set T one. Th e PS Tran sfer
lamp lights on the Dterm (Main Station).
2. All the calls to the Dter m are forwarded to the PS (Sub Station).
To cancel from the PS
1. While this feature is set, dial the cancel code for this feature and receive Service Set To ne. The PS Transfer
lamp goes off on the Dterm (Main Station).
2. This feature is cancelled.
Service Conditions
1. This feature is available for Series 7300 or later software.
2. A telephone number must be assigned to both Main and Sub Stations.
3. The PS cannot be assigned as Main Station.
4. Any combination of Main Station and S u b Station is available in a FCCS network.
5. The access code for an outgoing call cannot be assigned as a telephone number of the Sub Station.
6. Dialing the access code for this feature is available only for Main Station and Sub Station. Any other
station or trunk cannot set this feature.
7. The Dterm user can set this feature using any line on the Dterm. Even if the Dterm user sets this feature using
a sub line, this feature is set to My Line.
8. The “PS Transfer” key is available only when the Dterm is in idle state.