Overlap Dialing

Overlap Dialing	O-39

O-39	Overlap Dialing

This service allows the Dterm PS series user to receive a Dial Tone and to dial the desired number to originate a call.

Operating Procedure

To originate a call

1.Press the SEND or L1/L2 key; receive Dial Tone.

2.Dial the desired number. The dialed numbers are displayed on the LCD.

1.A maximum 24 digits (numbers 0 to 9, #, and *) can be dialed. (A maximum of 12 digits can be displayed on the LCD.)

2.The Dterm PS user can dial the number before hearing Dial Tone.

3.The prepause timer after receiving Dial Tone is ten seconds; and if no number is dialed within this period, the user receives Reorder Tone.

4.If the interdigit timer expires while the user is dialing the number, the numbers dialed before the timer will be sent out.

5.For every call origination, PS AUTHENTICATION is activated.

6.The Dterm PS-to-DtermPS calls cannot be recorded for the SMDR.

NEAX2400 IPX Wireless Features and Specifications	Page 33
NDA-24313, Issue 1

NEC nec specifications Overlap Dialing