Call Park - Dterm PSII |
|
Service Conditions
1.This feature is also available for Sub Line (L2) of a
2.The parked PS cannot hold a terminal.
3.A PS can park only one call at a time.
4.A PS cannot park an Attendant Console.
5.When the Call Park key of Attendant Console key pattern is valid, and the Attendant Console is parking a PS, the Attendant Console operator can retrieve the PS by dialing the Access Code and Individual Attendant Identification number which is assigned by “Individual Attendant Access).
Note: An Attendant Console is not made to recall.
6.When a PS which parks a call does not retrieve the call, it is recalled after fixed time which depends on Automatic Recall Timer. When a PS parks a call via C.O. line and then the C.O. side goes
7.This feature can be used with all PSs within the system (depending on Service Feature Restriction Class).
8.When the parked PS encounters the squelch disconnection, CALL FORWARDING - DROPPED CALLS is not available even though it is set.
9.If the PS recalled by Automatic Recall Timer is out of zone, the parked PS user receives Reorder Tone (ROT).
10.If the parked PS moves out of zone, it is disconnected.
11.The condition of “TTC Q.931a protocol Tie Line with PCS Roaming” is shown below.
| HOME PBX | VISITOR PBX |
|
|
|
PS parks a call | Available | Not Available |
|
|
|
PS retrieves a call | Available | Not Available |
|
|
|
PS is parked by terminal | Available | Available |
|
|
|
Note 1: When a visitor PS originates a call to PS/Station that belongs to the same office, the visitor PS cannot be parked.
Note 2: When a PS which parked a terminal moves to the visitor office, and then it is recalled by Automatic Recall Timer, the terminal receives Reorder Tone.
12.When programming this feature, telephone numbers should be used.
Interactions
The following features cannot be activated to a PS/Station that has been set Call Park:
•BUSY VERIFICATION
•CALL WAITING
•ATTENDANT
•EXECUTIVE RIGHT OF WAY - Dterm
NEAX2400 IPX Wireless Features and Specifications | Page 65 |
|
