Ricoh AP2610N setup guide Menu Host Interface, Host Interface Buffer, Host Interface Network Setup

Configuring the Printer for the Network

A Press {Menu}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In
3		ZFDP020N

“Menu” appears on the panel dis- play.

B Press {U} or {T} to display “Host Interface” menu.

Menu:

Host Interface

C Press {Enter #}.

On Line	Menu
Job Reset	Escape
Form Feed	Enter
Power	Error	Data In

ZFDP060N

The following message appears on the panel display.

Host Interface:

I/O Buffer

D Press {U} or {T} to display “Net- work Setup”.

Host Interface:

Network Setup

E Press {Enter #}.

The following message appears on the panel display.

Network Setup:

IP Address

F Select the protocol you want to use.

Note

❒Do not select protocols that are not used on your network.

A Press {U} or {T} to display “Active Protocol”.

Network Setup:

Active Protocol

BPress {Enter #}.

The current setting appears on the panel display.

Active Protocol:

TCP/IP

CPress {Enter #}.

DPress {U} or {T} to select "Ac- tive" or "Not Active", and then press {Enter #}.

ESet other protocols you need to set in the same way.

Note

❒Leave unused protocols "Not Active".

42