Ricoh AP2610N setup guide When the confirmation message appears, click Yes

Windows 2000 Configuration

Installing SmartNetMonitor for Client

Install SmartNetMonitor for Client from the CD-ROM labeled “Printer Drivers and Utilities”. For more information about how to install, see the Setup Guide.

After the installation is complete, configure the printer port with SmartNetMon- itor for Client. See p.19 “Setting Up the Printer Driver”.

2

Deleting the port

The following procedure allows you to delete the printer port. If you want to de- lete the port which is currently used in Windows, switch the port to another such as “FILE”, then delete it. For more information about SmartNetMonitor for Cli- ent, see SmartNetMonitor for Client Help.

A From the [Printers] window, click the icon of the printer which uses Smart- NetMonitor for Client to print. On the [File] menu, click [Properties].

B Click the [Ports] tab, and then make sure that the SmartNetMonitor for Cli- ent port is shown in the [Print to the following port(s)] box.

Remember the port name because this port should be deleted later.

C Select the [FILE] check box in the [Port] column.

D Click [OK] to close the Printer Properties.

The port which is currently in use is changed.

E Open the Printer Properties of the same printer.

F Select the [Ports] tab.

G At the [Port] column in the [Print to the following port(s)] dialog box, click to se- lect the SmartNetMonitor for Client port name as in step B.

H Click [Delete Port].

I When the confirmation message appears, click [Yes].

The port is deleted.

J Click [Close] to close the Printer Properties.

18