Ricoh AP2610N Configuring the IPP user authorization, Direct Printing Port, View settings

Appendix

❖Configuring the IPP user authorization

Use the following command:

ipp user

The following message appears.

Input user number (1 to 10):

Type the number, user name and password.

IPP user name:user1 IPP password:*******

After configuring the settings, the following message appears.

User configuration changed.

Direct Printing Port

The direct printing port allows printing directly from a computer, connected to the network, to the printer.

Use the diprint command to change the direct printing port settings.

❖View settings

The following command displays the current direct printing port settings.

msh> diprint

Example output:

	port 9100
7
	timeout=300(sec)

bidirect off

•The “Port” specifies the port number of the direct printing port.

•The “bidirect” setting indicates whether the direct printing port is bidirec- tional.

❖Setting timeout

You can specify the timeout interval to use when receiving data from the net- work.

msh> diprint [0~65535]

Note

❒ The factory default is 300 seconds.

❒ If 0 is set, timeout is disabled.

❖Bidirectional configuration for the direct printing port

Use this setting to configure whether the direct printing port is bidirectional. The factory default is “off”.

msh> diprint bidirect {onoff}

Note

❒ If you select “on”, SmartNetMonitor for Client or Standard TCP/IP on Windows 2000 might not work correctly.

100