Paper and Other Media

Loading custom sized paper in the

Bypass Tray

Important

The settings of custom sized paper that take effect are not the settings made on the control panel but the settings made in the printer driver. There is no need to change the set- tings on the control panel. Howev-

3

er, when using a printer driver

 

other than RPCS, you will need to

change the settings on the control panel.

Applications that do not allow a custom paper size to be set cannot print on custom sized paper.

Note

If you print on A3 or longer sheets, prints may become blurred.

A Press {Menu}.

On Line

Menu

 

Job Reset

Escape

 

Form Feed

Enter

 

Power

Error

Data In

"Menu" appears on the panel dis- play.

B Press {T} or {U} to display "Pa- per Input" menu.

C Press {Enter #}.

Paper Input:

Bypass Size

The following message appears on the panel display.

D Press {T} or {U} to display "Cus- tom Size".

Bypass Size:

Custom Size

E Press {Enter #}.

The following message appears on the panel display.

F Press {T} or {U} to display the length in the feed direction, and then press {Enter #}.

Custom Size:

Horiz. 11.69 "

The screen to enter the size along the length appears.

G Press {T} or {U} to display the size along the length of the feed direction, and then press {Enter

#}.

Custom Size:

Vert. 8.27 "

The screen returns to step D in a few seconds.

H Press {On Line}.

Menu

Paper Input

Ready

"Ready" appears on the panel dis- play.

42

Page 144
Image 144
Ricoh AP2610N setup guide Bypass Size Custom Size, Custom Size Horiz, Custom Size Vert, Menu Paper Input Ready