Ricoh AP2610N setup guide Ftp, To print one file, To print several files

UNIX Configuration

ftp

Depending on the number of files to be printed, use the put or mput commands.

1 Limitation

❒File names cannot contain “=” or “,”.

❖To print one file

ftp> put file_name

❖To print several files

ftp> mput file_name [file_name...]

Note

❒You can use wild cards ( * or ? ) for the file name with the mput command. The following procedure shows an example of how to print a file using ftp.

AStart ftp using the IP address or host name of the printer.

%ftp IP_address

Note

❒”host_name” is the name entered when executing the installation shell script.

BEnter the user name. Ignore the password, and then press the {RETURN} key.

Name:

Password:

CSet the file transfer mode to binary.

ftp> bin

Note

❒If the file transfer mode is not set to binary, the image might not be printed correctly.

DPrint the file.

Note

❒For example, to print one file named file1: ftp> put file1

❒For example, to print two files named file1 and file2: ftp> mput file1 file2

EExit ftp.

ftp> bye

12