Ricoh AP2610N setup guide Nv-Ram

Troubleshooting

	Messages/Second messages	Description	Solution
	Hardware Problem	An error has occurred in the	First, turn the power switch
	NV-RAM	printer.	off and then on. If the message
			appears again, call your sales
			or service representative.
	Hardware Problem	An error has occurred in the	First, turn the power switch
	Option RAM	optional Memory Unit.	off and then on. If the message
			appears again, call your sales
			or service representative.
			Turn off the power switch, Re-
			place the Memory Unit, and
			then turn on the power
			switch. See "Memory Unit
			TypeB 64MB" in the Setup
			Guide.
			Turn off the power switch, re-
			move the Memory Unit, and
			then turn on the power
5
			switch.

		Note
		❒ If you remove the Memory
		Unit, you must set up the
		option with the printer
		driver. If you are using
		Windows 95/98/Me, Win-
		dows 2000/Windows XP
		and Windows NT 4.0, see
		"Installing the Printer Driver
		and Software" in the Setup
		Guide.
		❒ In this case, you might not
		be able to print complex
		print jobs.
Hardware Problem	An error has occurred in the	First, turn the power switch
Shift Tray	shift motor of the shift tray.	off and then on. If the message
		appears again, call your sales
		or service representative.
Hardware Problem	An error has occurred in the	If you use the parallel I/F, re-
Parallel I/F	parallel I/F.	place the interface cable that
		caused the error. If the mes-
		sage appears again, contact
		your sales or service repre-
		sentative.
Hardware Problem	There is a problem related to	First, turn the power switch
USB	the Universal Serial Bus Con-	off and then on, If the message
	nection and Hardware.	appears again, call your sales
		or service representative.

64