Ricoh AP2610N setup guide 116

6

Making Printer Settings with the Control Panel

Menu	Description
WL. LAN Signal	You can check the signal strength when using the wireless LAN.

	Reference
	For more information about displaying the signal strength, see
	p.120 “Displaying the Signal Strength”.
WL. LAN Defaults	You can reset the wireless LAN settings to the default.
Key Repeat	You can scroll through the menu by holding this key down.

		Note
	❒ Default: On
Menu Protect *1	This procedure lets you protect menu settings against accidental
	changes. It makes it impossible to change the menu settings you
	make with the normal procedure unless you perform the required
	key operation. In a network environment, protecting settings re-
	stricts who can change menu settings to network administrators.
	•	Level 1
	•	Level 2
	•	Off
Series Prnt.Job *1	You can print series of print jobs without time intervals between
	them when jobs are sent from the same computer, PDL, and inter-
	face.

	Note
	❒ Default: On
	❒ When the Job Reset key is pressed, all jobs sent to the machine
	will be canceled.
Ppr.Size Error *1	You can select whether to have an error report printed when the
	paper size setting for the tray differs from the actual size of the pa-
	per in the tray. You can also select whether to have an error mes-
	sage displayed when feeding paper from the tray.

Note

❒Default: Do not detect

❒When it is "Detect", it prints with the paper size that was set when the error message appeared.

*1 While the printer is Online, press {Enter #}, and then press {Escape}. Finally, press {Menu}. You can access the "Menu Protect", “Series Prnt.Job” and “Ppr. Size Error” menu on the panel display.

116