Ricoh AP2610N setup guide Changing Port Settings, Lowing Ports box, and then click Close

Using SmartNetMonitor for Client

D If using a proxy server and IPP user name, click [Detailed Settings] and configure the necessary settings.

Note

❒For more information about these setting, see SmartNetMonitor for Cli- ent Help.

F Click [OK].
G Make sure that the specified printing port is displayed in the [Print to the fol-	2
lowing Port(s)] box, and then click [Close].

This completes the settings.

To print, select the specified printer. SmartNetMonitor for Client will now di- rect print data to the printer automatically.

Changing Port Settings

Follow the steps to change SmartNetMonitor for Client settings, such as Parallel Printing, Recovery Printing, TCP/IP, the proxy server and IPP URL.

Note

❒There are no settings for the NetBEUI protocol.

A From the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties].

B Click the [Ports] tab, and then click [Configure Port].

The [Port Settings] dialog box appears

•For TCP/IP protocol, you can configure Parallel Printing, Recovery Print- ing and Timeout Settings.

•For IPP, you can configure User Settings, Proxy Settings and Timeout Set- tings.

Note

❒For more information about these settings, see SmartNetMonitor for Client Help.

21