Ricoh AP2610N setup guide Collate, Duplex Printing, Windows 95/98/Me Off, Open to Left

Using PostScript 3

	Collate
	Use this function to enable collation. With this feature, the printer can efficiently
1	print collated sets of multiple-page documents.
	Limitation

❒To use this function, the optional Memory Unit of 96MB in total or Hard Disk Drive must be installed on the printer.

❒If you select Upper Tray as an output tray, it is shift collated automatically. The following table shows the tabs or menus where you can select this function.

Windows 95/98/Me	[Collate] on the [Setup] tab.
Windows 2000/Windows XP	[Printer Features] on [Advanced...] on the [Paper/Quality] tab
	in the Printing Preferences Properties.
Windows NT 4.0	[Printer Features] on [Document Options] on the [Advanced]
	tab.
Macintosh	[Collate:] on [Printer Specific Options] in the print dialog
	box.

Duplex Printing

Use this function to select duplex printing.

Limitation

❒To use this function, the optional Duplex Unit must be installed on the print- er.

The following table shows the tabs or menus where you can select this function.

Windows 95/98/Me	[Duplex] on the [Setup] tab.
Windows 2000/Windows XP	[Print on Both Sides (Duplex)] on the [Layout] tab in the
	Printing Preferences Properties.
Windows NT 4.0	[Print on Both Sides (Duplex Printing)] on the [Page Setup] tab
	in the Document Defaults dialog box.
Macintosh	[Print on Both Sides] on [Layout] in the print dialog box.

You can select the following items. The following items may vary depending on the operating system you are using.

Windows 95/98/Me

❖Off

Disables Duplex Printing.

❖Open to Left

Prints output so that you can open it to the left when bound along the left edge.

6