Manuals / Omega Speaker Systems / Household Appliance / Home Security System

Omega Speaker Systems iSE-TC manual Appendix E, iLog Error Messages, Error #, Description

Models: iSE-TC

1 60

Page 56

Appendix E		iLog Error Messages
Error #	Description		Note
Error #	Description		Note
-8003	User stopped logging readings.
-10005	Failed to find the iSE.		Ethernet cable is disconnected,
			iSE is powered off, connections
			across the firewall require longer
			“connection to socket time out”
-10006	Windows socket was closed.		setting.
-10006	Windows socket was closed.
-10007	Windows socket error.		Wrong IP or wrong Port number
			was used.
-10008	The iSE failed to respond to a request.		Wrong IP or wrong Port number
			was used.
-10011	Response came empty.		No data was sent.
-10012	Device responded with		Possibly the iLog is configured for
	"Serial Time Out" string.		wrong product model.
-10014	Terminal Server Mode when the Port is 1000.		Try Port 2000 in iLog configuration.
-15100	Error on obtaining the temperature reading.		Possibly the iLog is configured for
			wrong product model.

Page 56

Image 56

Omega Speaker Systems iSE-TC manual Appendix E, iLog Error Messages, Error #, Description

Contents

Shop on line at User’s GuideDual Thermocouple over the Internet For Latest Product ManualsPage Part 1 Introduction LIST OF FIGURES LIST OF TABLESFigure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure FigureFEATURES PART INTRODUCTION EMC Considerations1.2 Before You Begin 1.3 DescriptionLOCAL ALARMS --The iSE includes two 1.5 Amp output relays that are controlled by the alarm conditions you select. The relays can trigger flashing lights and a siren for example to alert personnel near the scene Page Figure 2.1 Mounting Figure 2.2 Dimensions PART 2 HARDWARE 2.1 Wall Mounting2.2 DIP Switches Figure 2.3 DIP Switch LocationRESET DIAGNOSTICS2.3 Parts of the iSE Unit Figure 2.4 Parts of the iSE UnitBATTERY & S5 JUMPER LOCATION RELAY CONNECTOR CONNECTORCONNECTORS CONNECTORS2.5.2 10Base-TCrossover Wiring 2.6 Relay and I/O Contact Wiring ConnectionsCrossover Cable Wiring 2.7 DC Power Input Wiring Connections2.8 Running on Battery Power Figure 2.9 Battery and S5 Jumper Location9VDC BATTERY INSULATOR COVER S5 PINSDATA RECORD TEST Figure 2.10Chart of Simulated Data2.9 Flash Memory Format Figure 3.1 Labeling PART NETWORK CONFIGURATION 3.1 Network Protocols3.2 Ethernet MAC Address Figure 3.2 DIP Switch on the Bottom Side of iSE OFF4 3 2 ON3.3 DHCP 3.4 DNS3.5.1 Default IP Address Figure 3.3 Telnet Login into the iSE3.6 Port Number Example C \ TelnetFigure 4.1 Pinging the iSE from MS-DOSPrompt 4.0 Testing the ConnectionPART OPERATIONS 4.1 iConnect Software 4.1 iConnect Software continued iSERVER HOME PAGEFigure 4.3 Accessing the iSE’s Home Page Menu Figure 4.4 Access Control ACCESS CONTROL4.2 Setting a New IP Address over the Network LOGIN ADMINISTRATOR4.3Setup and Operation Using the iSE Web Page prompted for a password, as shown in FigureEngineering TemperatureTemperature Output SignalAccessing iSE units within your internal network Accessing iSE units using the internetDiagnostics 4.3.1.3 Browser Proxy Selection4.3.2 Adjustable Chart Figure 4.8 Adjustable ChartOPTION 4.3.3 Retrieving Data from FlashOPTION 4.3.4 Access Control 4.3.4 Access Control continued 4.3.5 Configuration#1 RTC is not set and Flash Card is empty #2 RTC is set, and recording is in progressCONFIGURATION Flash Recording SettingsRemote Access Tunneling Figure 4.11 Configuration4.3.5 Configuration continued A Configuration/Device SetupTemperature 1and Temperature B Real Time ClockF Flash Recording 4.3.5 Configuration continued Start Recording Select to initiate a recordingH Terminal Server 4.3.5 Configuration continuedG Input Contact Closure 4.3.5 Configuration continued I Remote Access Figure 4.13 Sensor Parameters - Input Contact Figure 4.12 Sensor Parameters - Temperature4.3.6 Sensor Parameters TA71.34FTA72.48FTD-1.19F 4.3.6 Sensor Parameters continuedTA71.34F TA72.48F TD-1.19F 4.4 Telnet Setup 4.5 HTTPget Program4.5.1 HTTPget using Port httpget -r -S“*SRTC\r” 4.5.1 HTTPget using Port 1000 continuedare parameters needed for the command string is the command as the followingwhere 4.5.2 HTTPget and ARP to setup Device IP Addressarp -s192.168.1.200 00-03-34-00-06-b6 Figure 4.15 ARP Commands and Responses 4.6 ARP Protocol4.7 iLog Software Figure 4.16 iLog Software Logging DataFile Monitor Mail View Help Status Indicators Data Email ErrorDev1 alarm Dev2 alarm Dev1 alarm Dev1 alarm Dev2 alarm Dev1 alarm Dev1 alarmOptions Help Alarm EditorCancel Range AccuracyPt / 13%Rh-Pt 50to 40C / 40 to 1768CiSE SPECIFICATIONS LED IndicatorsAlarm I/O’s POWERPART FACTORY PRESET VALUES PRESET PARAMETERSFACTORY DEFAULTS Remote Access TunnelingSupply power. Unit measures Temperature The ac/dc power adaptor is 9VdcPART APPROVALS INFORMATIONAPPENDIX AGLOSSARY Appendix BIP Address Appendix CIP Netmask Address ClassMask Binary Value Mask Decimal ValueASCII Chart Appendix DBinary ASCIIASCII Chart Continuation Appendix DASCII Hex Ctrl KeyiLog Error Messages Error #Appendix E DescriptionPage Page TRADEMARK NOTICE WARRANTY/DISCLAIMERRETURN REQUESTS/INQUIRIES OMEGA…Of Course