4.5.1 HTTPget using Port 1000 (continued) | ||
httpget | ||
where: | are parameters needed for the command string | |
*SRTC | is the command as the following: | |
*SRTC | Read the temperature in C (Channel 1) | |
*SRTF | Read the temperature in F (Channel 1) | |
*SRHC | Read temperature in C (Channel 2) | |
*SRHF | Read temperature in F (Channel 2) | |
*SRDC | Read the differential in C | |
*SRDF | Read the differential in F | |
*SRA1 | Read temperature setpoints (Channel 1) | |
*SRA2 | Read temperature setpoints (Channel 2) | |
*SRB | Read the temperature in C, (both Channel 1 and Channel 2) | |
*SRYS | Indicate AC or DC power and battery status | |
*SRYRST | Reset Power on iSE | |
*SR_XD1 | Exclude alarm 1 (disable alarm 1 function) | |
*SR_XD2 | Exclude alarm 2 (disable alarm 2 function) | |
*SR_XC1 | Reset relay 1 latch condition | |
*SR_XC2 | Reset relay 2 latch condition | |
*SR_XE1 | Include alarm 1 (enable alarm 1 function) | |
*SR_XE2 | Include alarm 2 (enable alarm 2 function) | |
*SR_XP1 | Close relay 1 for < 200 mSec | |
*SR_XP2 | Close relay 2 for < 200 mSec | |
*SR_XH1 | Close relay 1 | |
*SR_XH2 | Close relay 2 | |
*SR_XL1 | Open relay 1 | |
*SR_XL2 | Open relay 2 | |
*SRT2 | Status of Contact 1 (Disable, Normal, Active) | |
*SRH2 | Status of Contact 2 (Disable, Normal, Active) | |
*SRD2 | Status of the Output associated with the Contacts (Active High, | |
|
| Active Low) |
\r is the carriage return termination character | ||
192.168.1.200 | is an IP address | |
2000 is a socket port number
Response:
076.6 (in Deg.F 35)
36
