HTTPget using Port | Omega Speaker Systems iSE-TC guide

4.5.1 HTTPget using Port 1000

You can setup and read the information from the iSE by using the HTTPget program. The following program can be used to read data from the embedded server firmware by using TCP port 1000. The command string is sent to this TCP port, then the response can be read back from the same socket.

The HTTPget.exe file is used to setup and read information from the iSE. This file will be automatically installed when you install the MailNotifier software available on our website and CD.

Notes on using HTTPget :

The HTTPget.exe program is installed to the windows directory (usually c:\winnt or c:\windows) when installing the Mail Notifier software.

1. Open up a command window (or have a DOS window) a) Click on start menu

b) Click on "Run"

c) In the dialog box that appears, type "cmd" or "command" and click on "OK" button.

d) A command window should now appear.

2. If you now type "HTTPget" and press the "enter" key, the program options should be displayed.

3. Next run HTTPget with the options displayed as shown in the following text

35

Image 39

Omega Speaker Systems iSE-TC manual HTTPget using Port

Contents

User’s Guide Page Dhcp DNS ISE and iLD Big Display on the Ethernet Network List of Figures Features Part Introduction Page ISE and iLD Big Display on the Ethernet Network Wall Mounting Part 2 Hardware DIP Switch Location DIP Switches Parts of iSE Unit Parts of the iSE Unit Opening the Unit Disassembly Instruction Relay and I/O Contact Wiring Connections Crossover Cable WiringNetwork Communication Interfaces 1 10Base-T RJ-45 Pinout Battery and S5 Jumper Location Running on Battery Power Data Record Test Flash Memory Format Network Configuration 3.1 Network Protocols PartEthernet MAC Address Section DhcpDNS Subnet Mask Default IP Address Port NumberExample C\Telnet 192.168.1.200 Part Operations Testing the Connection IConnect Software ISERVER Home Access Control Setting a New IP Address over the Network Setup and Operation Using the iSE Web Prompted for a password, as shown in FigureLogin and Administrator Passwords Read Sensor Read Sensor Java Runtime Environment 1.4 Setup instructions Java Runtime Environment 1.5 5.0 Setup instructions Accessing iSE units using the internetDiagnostics Fla sh Archive Adjustable Chart Option Retrieving Data from Flash Dhcp can be enabled by setting the dip switch number #4 RTC is not set and the Flash Card is not empty Configuration#1 RTC is not set and Flash Card is empty #2 RTC is set, and recording is in progress MegaBytes Flash Card 22 Kbytes Used Space Flash Recording SettingsRemote Access Tunneling Real Time Clock Temperature 1 and Temperature Configuration/Device Setup Flash Recording Input 2 Status Unlatch, Latch, Clear Latch, Chart SP Configuration Terminal Server Configuration Input Contact Closure Configuration Remote Access Sensor Parameters 12 Sensor Parameters Temperature TA71.34FTA72.48FTD-1.19F TA71.34F TA72.48F TD-1.19F HTTPget Program Telnet Setup HTTPget using Port Srhf SrtcSrtf Srhc HTTPget and ARP to setup Device IP Address Arp -s 192.168.1.200 00-03-34-00-06-b6Where ARP Protocol 15 ARP Commands and Responses 16 iLog Software Logging Data ILog Software Mail Notifier Software Installation Options Email Setup 19 iSE Mail Notifier Device Setting Device Setting and Configuration Device setup requires Thermocouple Input Part Specifications Sensor Specifications Packaging PowerInterfaces Environmental Network Interface Measurement Category Part Approvals Information CE Approval Appendix Aglossary Appendix BIP Address Mask Dotted Notation Mask Binary Mask Bits Appendix CIP NetmaskAddress Class Mask Binary Value Mask Decimal Value Or Dotted Notation Char No Parity No parity Appendix D Hex Ascii Chart Dec BinaryAscii Dec Binary Appendix D Ascii Chart Continuation Dec Hex Ctrl Key Ascii Control Codes DefinitionChar Equiv Appendix E ILog Error Messages Error # Description Page Page WARRANTY/DISCLAIMER Shop on line at omega.com