Omega Speaker Systems iSE-TC manual Setup and Operation Using the iSE Web

4.3Setup and Operation Using the iSE Web Page

• Start your web browser.

• From the browser you type http://eisxxxx using the last four-digits from the MAC address label located on the device if DHCP and DNS are used. If a static IP address

• is used, then simply type http://x.x.x.x, where x.x.x.x is the iSE’s IP address. The Home Page, shown in Figure 4.5, will be displayed.

				Figure 4.5 iSE Home Page
		In order to access certain menu items of the Home Page, users may be
		prompted for a password, as shown in Figure 4.6.
LOGIN				ADMINISTRATOR
	http://192.168.1.200			http://192.168.1.200
			LOGIN	ADMINISTRATOR
			Figure 4.6	LOGIN and ADMINISTRATOR Passwords

There are 2 different access levels:
1. ADMINISTRATOR Password (administrator) allows certain groups and individual users to
access and modify "entire" iSE parameters without any restrictions.
The default password is 00000000. This password can be up to 16 alphanumeric case-
sensitive characters.
2. LOGIN Password (operator) allows users to access and modify all of the iSE’s
parameters, except “Access Control” which requires an Administrator
password. The "Read Sensor" does not require a password.
The default password is 12345678. This password can be up to 16 alphanumeric
case-sensitive characters.	19