Menu Maintenance, Maintenance HDD Format | Ricoh AP2610N instruction

Maintenance Menu

Formatting Hard Disk Drive Type 2600

If you are formatting the Hard Disk Drive for the first time, follow the proce- dures below using the control panel.

A Press {Menu}.

“Menu” appears on the panel display.

B Press {U} or {T} to display “Maintenance” menu.

Menu:

Maintenance

C Press {Enter #}.

The following message appears on the panel display.

Maintenance:

Image Density

D Press {U} or {T} to display “HDD Format”.	6

Maintenance:

HDD Format

E Press {Enter #}.

The following message appears on the panel display.

HDD Format:

Press# to Start

F Press {Enter #}.

Important

❒Do not turn off the printer while formatting the Hard Disk Drive. Turning off the printer while formatting the Hard Disk Drive can damage the Hard Disk Drive.

If you successfully format the Hard Disk Drive, the following message ap- pears on the panel display.

Completed

Restart Printer

G Turn off the power switch, and then turn it back on.

119

Image 221

Ricoh AP2610N setup guide Menu Maintenance, Maintenance HDD Format, HDD Format Press# to Start, Completed Restart Printer

Contents

Setup Guide Means Power ON. b means Power OFF Setup Guide Page Trademarks Safety During Operation Safety Information Iii Positions of Labels and Hallmarks for Rwarning and RcautionPage Energy Saver mode SpecificationsEnergy Star Program Recycled Paper Manuals for This Printer Manuals for This Printer Vii How to Read This ManualSymbols Table of Contents Installing the PostScript Printer Driver Installing the Rpcs Printer DriverInstalling the Printer Driver Using USB Installing the Printer Driver Using IeeePage Major Specifications Features of This PrinterTime Saving Compact Body Rpcs printer driver Printer Drivers for This PrinterPCL printer drivers Adobe PostScript Printer Drivers and PPD files Software and Utilities Included on the CD SmartNetMonitor for AdminAgfa Monotype Font Manager SmartNetMonitor for Client Viewing the Contents of the CD-ROM Exterior Guide to This PrinterMainframe Power Switch Front Cover Release Button Power CordOutput Tray Standard Tray Upper Cover Interior Control Panel Job Reset keyForm Feed key Menu key Enter # key Escape key Option List Installing Options Envelope Feeder Type Available OptionsPaper Feed Unit Type 2600 Tray 2 or Tray Basic model Printer Interior 802.11b Interface Unit Type a Memory Unit TypeB 64MB Network standard model Printer InteriorMemory Unit TypeB 64MB Hard Disk Drive Type Attach the interface cable to the printer Paper Feed Unit Type Reference Envelope Feeder Type Use a coin to remove the two screws Memory Unit TypeB 64MBPull out the handle of the control- ler board Pull the handle and slide the con- troller board out If the Duplex Unit is not at- tached, go to step N Installing Options Network Interface Board Type Installing the Network Interface Board Fasten the Network Interface Board to the controller board If the Duplex Unit is not at- tached, go to step O Turn off the power switch Loop the network interface cable Connecting the Network Interface Cable to the Network Interface Unit Type Installing the 1394 Interface Unit Attach the 1394 Interface Unit to the controller board Fasten the 1394 Interface Unit to the controller board Power supply Connecting the 1394 InterfaceRequired cable Bus 802.11b Interface Unit Type a Attach the 802.11b Interface Unit Ing the Configuration Fasten the Hard Disk Drive HDD Error Initialize ?Hard Disk Drive Type Ready HDD Initialize Finish OKPress Enter # to format the Hard Disk Drive Press On Line Remove the rear cover in the hor- izontal direction AD410 Duplex Unit After installing the last option that Remove the upper cover of the printer Bin Shift Sort Tray Type Slide the upper tray into the 1-bin Shift Sort Tray CS380 Mailbox CS380 Mailbox Installing Options Setting Name Value Ethernet Configuration Network Setup IP Address Host Interface Network SetupNetwork Setup Active Protocol Menu Host Interface Network Boot *None Network Setup Network BootPress U or T to display Network Boot IP Address 192.02k.033.044 Network Setup LAN Type Network Setup Frame Type NWFrame Type NW *Auto LAN Type *Ethernet Host Interface Ieee 1394 Setup Ieee 1394 ConfigurationIeee 1394 Setup IP Address1394 Ieee 1394 Setup IP over Scsi print *Active Ieee 1394 Setup Scsi printIP Address1394 192.02k.033.044 Ready Ieee 802.11b Comm. Mode Ieee 802.11b Wireless LAN ConfigurationHost Interface Ieee 802.11b Press U or T to display Ieee 802.11b Address Ieee 802.11b ChannelSubnet Mask Gateway Address Configuring the Printer for the Network Connection Installation Method Select Quick Install Quick Install Follow the instructions on the screen Click Install Select PCL/RPCS Printer Drivers Installing the PCL 6/5e Printer DriverInstalling the PCL 6/5e Printer Driver Setting Up Options Installing the Rpcs Printer Driver Installing the Rpcs Printer Driver Installing the Rpcs Printer Driver Windows 95/98/Me Installing the PostScript Printer Driver Installing the PostScript Printer DriverInstalling the printer driver Click Next Check Local Printer and then click Next Select PostScript 3 Printer Driver Add Printer Wizard starts Setting up options Click the Device Settings tab Windows NT 4.0 Installing the PostScript Printer Driver Bidirectional transmission When connecting with a parallel cable When connecting with USB When connecting with the networkWhen connecting with Ieee Setting up the PPD file Macintosh Installing the PostScript 3 Printer Driver Close the Chooser dialog box Click Configure Windows 98/Me Installing the Printer Driver Using USB Installing the Printer Driver Using USBCheck Specify a location, and then click Browse Click Finish Click Change in USB Printer Selection Macintosh-Creating a Desktop Printer iconClick Create Enter the printer name, and then click Save Printing with Scsi Print Installing the Printer Driver Using Ieee Click Open Click OK Click Browse Windows XP Inactivating the Device Printing with IP over Found New Hardware Wizard dialog box, and then click Next Select SmartNetMonitor for Client/Admin Installing the SmartNetMonitor for Client/Admin Select Agfa Monotype Font Manager Installing the Agfa Monotype Font Manager Using Adobe PageMaker Version 6.0 or Index Rpcs UE USA G074 Means Power ON. b means Power OFF UE USA G074-8637 Printer Reference Page Trademarks Printer Reference this manual Setup Guide How to Read This Manual Table of Contents Maintenance Menu 114 Error & Status Messages on the Control PanelSample Print Locked Print Specifications 157 Replacing Parts 143Consumables 164 Information about Installed Software 165 System Menu 124 Windows 95/98/Me Accessing the Printer Properties PCL 6/5e Accessing the Printer PropertiesChanging the default printer settings Making printer settings from an application Changing the default printer settings Printer Properties Windows 2000/Windows XP Accessing the Printer Properties Click Print to start printing Select the printer you want to use in the Select Printer box On the File menu, click Document Defaults Windows NT 4.0 Accessing the Printer Properties Click OK to start printing Rpcs Accessing the Printer Properties On the File menu, click Printing Preferences Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application Make any settings you require and click Apply Click OK PostScript Setting Up for Printing Printing Preferences Properties appears Select the printer you want to use in the Select Printer box Windows NT 4.0 Accessing the Printer Properties Making printer settings from an application Making paper settings from an application Macintosh Setting Up for PrintingSetting up for printing from an application On the File menu, click Page Setup Select the name of the job you want to cancel Canceling a Print JobOn the Document menu, click Cancel Printing Press Job Reset on the control panel Double-click the printers icon on the desktop Macintosh Canceling a Print Job Click Yes to uninstall the printer driver Uninstalling the PCL 6/5e Printer DriverWindows 95/98/Me Uninstalling the PCL 6/5e Printer Driver Windows NT 4.0 Uninstalling the PCL 6/5e Printer Driver Windows 95/98/Me Uninstalling the Rpcs Printer Driver Uninstalling the Rpcs Printer Driver Close all applications that are currently running Windows NT 4.0 Uninstalling the Rpcs Printer Driver Windows 95/98/Me Uninstalling the PostScript Printer Driver Uninstalling the PostScript Printer Driver Macintosh Uninstalling the PostScript Printer Driver Windows NT 4.0 Uninstalling the PostScript Printer Driver This manual On the panel display Paper feed direction Paper and Other Media Supported by This PrinterPaper Types and Sizes MmSize Input Paper Sizes Metric version Input Paper Sizes Inch version 10.12 ⋅ Supported paper weight Maximum number Sheets plain paper *1 Paper weight and number of sheets to be set Output Paper Sizes Metric version Output Paper Sizes Inch version 16K 68 ⋅ 101/2 101/2 ⋅ Loading Paper Paper RecommendationsStoring Paper Types of Paper and Other Media Plain paper Adhesive labels OHP transparenciesEnvelopes Metric version Inch version Paper not supported by this printer Printable Area Load paper into the tray with the print side down Loading Paper and Other MediaLoading Paper in the Paper Tray Slide the catches inwards to unlock the tray Changing the paper size Return the catches to their orig- inal positions Slide the tray until it stops Open the Bypass Tray Adjust the side guides to the pa- per widthLoading Paper in the Bypass Tray Paper Input Bypass Size Menu Paper InputBypass Size *11 x Bypass Size 2 x Custom Size Horiz Bypass Size Custom SizeCustom Size Vert Menu Paper Input Ready Paper Input Paper Type Setting the Bypass Tray Paper TypePaper Type Bypass Tray Bypass Tray Thick Paper Loading Paper in the Optional Paper Tray Load paper into the paper tray with the print side down Loading EnvelopesLoading envelopes onto the Bypass Tray Press U or T to display Paper Input menu Slide the side guides against the edge of the envelope stack Press U or T to select the envelope type you want to use Loading envelopes into the Envelope Feeder Unit Push the bottom plate down until it locks into place Tray Paper Size Tray Paper Input Tray Paper SizePress U or T to display Tray Paper Size Press U or T to display Tray Ready message appears on the control panel Printing a Sample Print File From an application, select the menu command to printSample Print Select Action Print File Sample Print 0856 ABCD1234Menu Sample Print Qty Press # to Print Processing Deleting a Sample Print FileABCD1234 Press# to Delete Deleted Sample Print Error Files Checking the Error LogError Files 0652 ABCD1234 Press T or U to display Error Files Ready Click OK After making all desired settings, click OK Password box, type a pass- word of four digitsLocked Print Printing a Locked Print File Password *2 PasswordInvalid Password Try Again Menu Locked Print Press T or U to display the Locked Print menu ABCD1234 Press # to Print Press T or U to display De- lete File Select Action Delete File Locked Print Error Files Messages/Second messages Description Solution Error & Status Messages on the Control Panel Troubleshooting See 1394 Interface Unit Type NV-RAM Error & Status Messages on the Control Panel Enter # Messages/Second messages Description Solution Messages/Second messages Description Solution Printer current status Getting Printer Information over the NetworkTelnet Messages Description Comments Messages Description Comments Messages Description Comments Messages Description Comments Name Description Printer configurationInput Tray Name Paper Size Description Input Tray Paper Size Output Tray Name Input Tray StatusOutput Tray Status Status Description Printer Does Not Print Possible Cause Solutions Network Connection Terface cable ERS\ UTILITY\1394\ Status Possible Causes, Descriptions, and Solutions Other Printing Problems On from the Maintenance menu Other Printing Problems Removing Misfed Paper When Remove Misfeed Paper Tray Appears When Remove Misfeed Internal Path/Open Front Cover Appears Close the front cover When Remove Misfeed Paper Exit Cover Appears Remove the misfed paper Open the paper exit coverClose the paper exit cover until it clicks Remove the rear cover in a hor Izontal direction Close the rear cover Insert the fusing unit until it stopsWhile holding the tab, remove the misfed paper Close the rear cover of the Du- plex Unit When Remove Misfeed Duplex Unit Appears Pull the Duplex Unit out Close the cover of the Duplex UnitPrinter until it stops, and remove Misfed paper Close the cover of the Mailbox Open the cover of the MailboxOpen the upper tray cover Close the upper tray cover Replacing the Toner Cartridge Be sure to put the toner cartridge on a stable, flat surface ZGDH130J Cleaning the Friction Pad Cleaning and Adjusting the Printer Move the printer to the edge of a stable table or desk Cleaning the Paper Feed Roller ZGDM120J Cleaning the Registration Roller Maintenance Image Density Adjusting the Image Density Press U or T to set the image density value Adjusting the Registration of the Trays Registration Prt. Test Sheet Adjustment Horiz. TrayPrt. Test Sheet Tray Printing Press U or T to set the dig- it of the registration value mm 100 Category Function menu Menu Chart101 102 103 104 Accessing the Main Menu 105 Paper Input Parameters Paper Input MenuTray 106 107 Tray 1, Tray 2, Tray Paper Input Tray Priority Changing the Paper Input MenuTray Priority *Tray 108 109 List/Test Print Menu Printing a ConfigurationList/Test Print Parameters 110 Menu List/Test Print List/Test Print Config.111 Press T or U to display the List/Test Print menu Interpreting the Configuration Error Log MaintenancePaper Input System 114 Maintenance Menu Adjustment Maintenance Menu ParametersPrt. Test Sheet 115 116 Maintenance Menu Protect Changing the Maintenance MenuMenu Protect *Off Protecting the menus 118 Canceling the protection Maintenance HDD Format Menu MaintenanceHDD Format Press# to Start Completed Restart Printer Displaying the Signal Strength Maintenance WL.LAN SignalPress T or U to display the Maintenance menu Press T or U to display WL.LAN Signal Press Escape WL.LAN Signal Good 100% Fair 50% Poor 30% Unavailable 18%121 122 Resetting the Ieee 802.11b Wireless LAN Settings WL.LAN Defaults Reset-Defaults? Maintenance WL.LAN DefaultsDefaults reset Press T or U to display WL.LAN Defaults 124 System Menu 125 126 127 Tiff Changing the System Menu System MisfeedRecoveryMenu System System Energy Saver Press U or T to display E. Saver Timer Energy Saver Saver TimerEnergy Saver Saver On/Off Energy Saver *30 minutes 130 Host Interface MenuHost Interface Parameters 131 Menu Description Network SetupIP Address Frame Type NW Network BootActive Protocol Ethernet Subnet Mask1394 IP Address1394IP over Scsi print Comm.Mode WEP SettingsChannel Trans. Speed Press U or T to display I/O Timeout Host Interface TimeoutChanging the Host Interface Menu 135 136 Timeout *15 seconds 137 PCL MenuPCL Parameters 138 PCL Menu Orientation Changing the PCL MenuOrientation Portrait 139 140 Changing the Language Menu Language MenuMenu Language 141 142 Language English 143 Replacing Parts Checking the contents of the box Maintenance KIT Type Replacing the Friction Pad Check the contents of the box for the following itemsPreparing to replace the parts 145 Insert the new friction pad in the paper tray Replacing the Paper Feed Rollers 147 Replacing the Transfer Roller 148 Remove the rear cover in a hor- izontal direction Replacing the Fusing Unit149 150 Pull the fusing unit outReplace the new fusing unit into the printer Collate Collate and Shift CollateShift Collate 151 152 Spool PrintingConfirm or delete the spooled job from a Web browser 153 Setting of the Frame PriorityMemory Capacity and Paper Size 154 Setting of the Font Priority Moving the Printer Moving and Transporting the PrinterMoving the printer in the short distance 155 156 Removing the Duplex Unit Specifications Power Source Paper WeightPower Consumption Dimensions *1 Paper Capacity Warm-up TimePaper Output Capacity Memory Envelope Feeder Type Dimensions W⋅D⋅H Paper Feed Unit Type Dimensions W⋅D⋅HAD410 Duplex Unit Dimensions W⋅D⋅H Options CS380 Mailbox Dimensions W ⋅ D ⋅ H Bin Shift Sort Tray Type Dimensions W ⋅ D ⋅ HStack Capacity Hard Disk Drive Type Storage Capacity Formatted Interface Connector Number of PinsMemory Unit TypeB 64MB Module Type Memory Type 802.11b Interface Unit TypeA R-WL11 Transmission Spec Transmission ModeProtocol Data Transfer Speed Consumables Maintenance KitToner Cartridge 164 165 Information about Installed SoftwareExpat 166 NetBSD 167 Authors Name List 168 169 170 Copyright UE USA G073-8617 Network Printing Guide Page Manuals for This Machine How to Read This Manual Features Interface supported protocols Windows 95/98/Me, Windows 2000/Windows XP, Windows NT Setting Up the Machine on a Network NetWare Configuring the machine as a print server Macintosh Configuring the machine as a remote printer Ad hoc mode Printing using the Ieee 802.11b Interface Infrastructure mode Printing using the Ieee 1394 Interface Configuring Protocols Configuring Windows 95/98/MeUsing SmartNetMonitor for Client Setting Up a Client Computer Installing the NIB Setup Tool Configuring Windows NTNetWare 4.x, 5/5.1 Advanced Settings Configuring Macintosh Monitoring and Configuring the Printer Using SmartNetMonitor for AdminUsing the Ieee 802.11b Wireless LAN Remote Maintenance by telnet Xiv Printing with a Windows 2000 or Windows NT Print Server Configuring Windows 95/98/MePrinting without a Print Server Configuring TCP/IP and IPP for Printing Configuring ProtocolsConfiguring the machine Command Prompt Configuration tab Configuring NetBEUI for PrintingConfiguring a Windows 95/98/Me computer Configuring a Windows 95/98/Me computer SmartNetMonitor for Client features Using SmartNetMonitor for Client Uninstalling SmartNetMonitor for Client Installing SmartNetMonitor for ClientDeleting the port Click OK to close the printer properties Click the printer you want to use, and then click OK Setting Up the Printer DriverSelect the printer Click IPP Click NetBEUI Changing Port Settings Install the printer driver as a local printer Setting Up a Client Computer Printers connected to the network are displayed Windows 95/98/Me Configuration Printing with a Standard TCP/IP Port Configuring Windows Printing with a LPR Port Configuring a Windows 2000 computer Configuring the Protocols Configuring NetBEUI for Printing Using SmartNetMonitor for Client Click Close to close the Printer Properties When the confirmation message appears, click Yes Setting Up the Printer Driver Then type the IP address or host name Lowing Ports box, and then click Close Click Start, point to Settings, and then click Printers Configuring LPR Port Printing Click Next Click Network printer, and then click Next Click the printer you want to use, and then click Next Configure the protocol Configuring Windows XP Windows 2000, Windows XP or Windows NT print server Configuring the Protocols With the IP over 1394, click 1394 Connection Configuring a Windows XP computerInternet Connections Using SmartNetMonitor for Client Installing SmartNetMonitor for Client Setting Up the Printer Driver TCP/IP Changing Port Settings Configuring LPR Port Printing Click Next Click the printer you want to use, and then click Next Configuring Windows NT Windows NT 4.0 Configuration Configuring a Windows NT computer Configuring NetBEUI for Printing Type 0 as the Lana Number Using SmartNetMonitor for Client Click Apply From the Print to the following port box, select File Setting Up the Printer Driver IPP Changing Port Settings Configuring LPR Port Printing Click Network printer server and click Next Click the printer you want to use and click OK Printers listed by SmartNetMonitor for Admin Installing the NIB Setup Tool Running the NIB Setup Tool Installing SmartNetMonitor for Admin Click IPX protocol Quick Setup Using the NIB Setup Tool WizardClick Wizard and click OK Dialog box for configuring the NetWare environment appears After checking the environment, click Next Basic Procedure NetWare 3.x Advanced Settings Select Bindery Setting Up as a Print ServerClick Property Sheet and click OK For type, select Remote Other/Unknown Create a print queue as follows Pconsole Setting Up as a Remote Printer Remote Printer No. box, type the printer number Print Server Operation Mode group, click As Remote PrinterSelect the printer which is indicated as Not Installed To start To exitType a new name, if you change the name of the printer Select Remote Parallel, LPT1 for type To use NetWare 5/5.1 NetWare 4.x, 5/5.1 Advanced Settings Click Property Sheet and click OK Click IPX protocol Print Queue volume box, click the Browse button Click TCP/IP protocol Using Pure IP in the NetWare 5/5.1 environment NDS Context box, type the context of the print server Print Server Operation Mode group, click As Print Server Setting Up as a Remote Printer Remote Printer No. box, type the number of the printer Print Queue Volume box, click Browse button To exit Click Network and click Browse Install the printer driver you want to use as Local printerWindows 95/98/Me Select to clear the Form feed and Enable banner check boxes Click the Printer Settings tabWindows Click the PostScript tab Windows NT Changing to EtherTalk Configuring Macintosh Changing the Zone Configuring the PrinterChanging the Printer Name Protocol Stack Using SmartNetMonitor for Admin Selecting Property Sheet Changing the Network Interface Board ConfigurationSelecting Wizard Type the password, and then click OK Configuring the Energy Save ModeManaging the User Information From the Tools menu, select User Management Tool Browser Configuring the Network Interface Board with a Web BrowserOperating system browser requirements Status Going to the TopHeader Buttons Menu Buttons Configuring the Network Interface Board Settings Password IPP AuthenticationIeee 802.11b Wireless LAN Verifying the Network Interface Board Settings Linking the address URL to the Help button Web Browser Monitoring and Configuring the PrinterChanging Names and Comments Select Property Sheet, and then click OK Exit SmartNetMonitor for AdminClick the NetBEUI tab Type the computer name into the Computer Name box Change names and comments Type the user name and the password, and then click OK Exit the Web browser Displaying the Status of Printer Monitoring Printers Click Status and you can check the status of the printer Setting Ieee 802.11b Wireless LAN Using the Ieee 802.11b Wireless LAN LAN Type Ieee 802.11b Using in Ad hoc Mode Enter your user name and pass- word, and then click OK Changing to Infrastructure Mode Setting the WEP Key Setting SsidUsing WEP Applying the Settings Make sure the LED of the Ieee 802.11b card is lit Confirming the Connection Using telnet Remote Maintenance by telnet Interface name Interface to be configured Commands ListTCP/IP address Reference Changing the Interface Msh ifconfig interface up Msh access range start-address end-address Access Control Protocol Command Information that is displayedPrinter status System log information Network Interface Board configuration settings information Access type configuration Community name configurationProtocol configuration Access configuration IPP user authorization configuration Viewing settingIPP timeout configuration View settings Configuring the IPP user authorizationSetting timeout Bidirectional configuration for the direct printing port Commands Topics of setting Parameter Settings Parameter Value to be configured Setting Ieee 802.11bIeee 802.11b settings are displayed Key key value Job Spool Changing the Host Name Job Spool SettingClearing Spool Job AutoNet Address configuration Time-zone Configuration NTP Server Address ConfigurationInterval Configuration Type the current password Changing the passwordType the new password Type the new password once again Supported MIBs Snmp Print Job Information Understanding the Displayed InformationPrint Log Information Item name Meaning Configuring the Network Interface Board 111 Ssid System Log Information Message Description and SolutionsMessage List 114 115 IPXIP,NDSBINDERY 117 118 Connecting a Dial-Up Router to a Network PrecautionsConfiguring the router Configuring the printer with NetWare PostScript Printing from Windows NetWare Printing Printing after resetting the machineForm Feed Banner Using AutoNet Using Dhcp Click Network Config Configuring a Wins ServerUsing a WWW browser When Using IPP with SmartNetMonitor for Client When Using the NIB Setup ToolUsing telnet Log out from telnet Snmp Telnet 126 Copyright Network Printing Guide PostScript Page Using PostScript Page Normal Setting up OptionsJob Type Select Sample Print in Job Type Click Details How to Use Sample Print Select Sample Print in Print Job After making all of the settings you want, click Print Select Locked Print in Job Type Click Details How to Use Locked Print Digits Select Locked Print in Print Job Duplex Printing CollateWindows 95/98/Me Off Open to Left Paper Selection Paper source Paper SizeMedia Type Toner Saver ResolutionDestination Tray Duplex Unit User Code Upper Tray Hard DiskMailbox Using PostScript Start the Macintosh Insert the CD-ROM into the CD-ROM drive Installing Printer Utility for Mac Double-click the icon of Printer Utility for Mac Starting Printer Utility for Mac Utility menu Printer Utility for Mac FunctionsFile menu Click Download Click CancelDownloading PS Fonts Deleting Fonts Displaying Printers Fonts Printing Font Catalog SetupInitializing the Printer Disk Renaming the Printer Printing Font SampleSelect Print Fonts Sample... on the File menu Select Rename Printer... on the File menu Selecting the Zone Restarting the PrinterDownloading PostScript Files Launching the Dialogue Console Displaying the Printer StatusClose Chooser Select Display Printer Status... on the Utility menu Printer Utility for Mac Printer Utility for Mac Page Unix Supplement Page Manuals for This Printer How to Read This Manual Printing Method Using the Installation Shell ScriptPage Assigning the IP Address Using the Installation Shell Script Confirming the IP address Executing the Installation Shell ScriptAEnter the following ALog on to the workstation as root Close the ftp session Type the following to get the installation shell scriptCRun the installation shell script IMake a test print to confirm that the settings are correct Configure the printer nameEEnter the IP address of the printer FEnter the host name of the printer Solaris, HP-UX Deleting the printerBSD Unix workstation, Linux Mx#0 Adding an entry to the /etc/printcap file Making the log file Making the spool directory Registering the printer # lpadmin -p np -s nphost!option -T dump -I any Restart the scheduler BSD Unix workstation Printing MethodPrinting with lpr, lp Rsh Printing with rsh, rcp, ftpRcp To specify the file and print it To print all of the files in a directory To print several files FtpTo print one file Viewing the Printer Status with lpq and lpstat Printer StatusViewing the Printer Status with rsh and ftp System V UNIX, Soralis, HP-UX Parameter Information returned Reference Copying Information to a File Unix UE USA G056 Copyright Unix Supplement Quick Installation GUIDEG074-8627 USB connection Network connectionParallel connection