Ricoh AP2610N setup guide Installation Method, Connection

4.Installing the Printer Driver and Software

This manual assumes that you are familiar with general Windows procedures and practices. If you are not, see the documentation that comes with Windows for details.

Installation Method

The following table shows how to install the printer drivers and software.

		Auto Run *1
	Quick Install		Custom
			installation *2
	Network conn	Parallel
	ection with TCP/IP	connection
PCL 6 printer driver	❍	❍	❍
PCL 5e printer driver			❍
RPCS printer driver	❍	❍	❍
PostScript printer driver			❍
Agfa Monotype Font Manager			❍
2000
SmartNetMonitor for Admin			❍
SmartNetMonitor for Client	❍		❍

*1

*2

Available operating systems are as follows: Windows 95/98/Me, Windows 2000, Windows XP, Windows NT 4.0

Using custom installation, you can install various software separately.

Reference

When the printer is connected to the computer using USB, see p.66 “Installing the Printer Driver Using USB”.

When the printer is connected to the computer using IEEE 1394, see p.68 “In- stalling the Printer Driver Using IEEE 1394”.

Important

❒Before starting this installation, close all documents and applications. In a net- work environment, confirm that users who are logged on are disconnected. Be sure to do this when it will create the least interference with other users.

❒After installing a printer driver, you must restart the computer.

Note

❒If the "plug and play" function starts, click [Cancel] in the [New Hardware Found], [Device Driver Wizard] or [Found New Hardware Wizard] dialog box, and then insert the CD-ROM. The [New Hardware Found], [Device Driver Wizard] or [Found New Hardware Wizard] dialog box appears depending on the system version of Win- dows 95/98/Me, or Windows 2000/Windows XP.

51