Ricoh AP2610N setup guide Print Server Operation Mode group, click As Remote Printer

NetWare Configuration

B In the [File Server Name] box, type the name of the file server in which a print server is to be created.

Clicking [Browse], you can select a file server among those listed in the [Browse] dialog box.

CIn the [Print Server Operation Mode] group, click [As Remote Printer].

DIn the [Remote Printer No.] box, type the printer number.

Important

❒ Use the same printer number as that to be created in the printer server.

EClick [OK] to close the property sheet.

FAfter the confirmation dialog box appears, click [OK].

J On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.

K Type “PCONSOLE” from the command prompt.

F:> PCONSOLE

5L Create a print queue as follows:

Note

❒If you use a currently defined print queue, go to step M.

AFrom the [Available Options] menu, select [Print Queue Information], and then press the {ENTER} key.

BPress the {INSERT} key, and then type a print queue name.

CPress the {ESC} key to return to the [Available Options] menu.

M Create a printer as follows.

AFrom the [Available Options] menu, select [Print Server Information] , and then press the {ENTER} key.

BTo create a new print server, press the {INSERT} key, and then type a print server name.

If you use a currently defined print server, select one of the print servers shown in the [Print Server] list.

Important

❒Use the same name as that specified in the NIB Setup Tool. (Step H).

CFrom the [Print Server Information] menu, select [Print Server Configuration].

DFrom the [Print Server Configuration] menu, select [Printer Configuration].

ESelect the printer which is indicated as “Not Installed”.

Important

❒Use the same number as that specified as Remote Printer No. using the NIB Setup Tool. (Step I-D).

58