Ricoh AP2610N setup guide Envelope Feeder Type

Envelope Feeder Type 2600

Envelope Feeder Type 2600

Note

❒This unit is a tray that slides into the optional Paper Feed Unit. Without the optional Paper Feed Unit, this Envelope Feeder cannot be used.

❒Your printer can have two optional Paper Feed Units. However, the Envelope Feeder must be used in the top-most optional Paper Feed Unit (Tray 2). It cannot be used in the bottom-most optional Paper Feed Unit (Tray 3).

Important

❒Do not slide more than one paper tray out at the same time. Having more than one paper tray filled with paper in a fully extended po- sition could cause the machine to fall down.

A Check the contents of the box for the following items:

•Envelope Feeder

•Installation Guide

B Pull out the second paper tray (Tray 2) of the optional Paper Feed Unit until it stops. After that, lift it slightly, and then pull it out.

ZDDP330E

Important

❒The Envelope Feeder must be used in the top-most optional Paper Feed Unit (Tray 2).

❒ The tray of the top-most option- 2

al Paper Feed Unit is beneath the paper tray.

Note

❒Keep the paper tray with paper in a cool dark place.

C While lifting the front side of the Envelope Feeder, place the feeder into the printer. Then slide it into the printer until it stops.

ZDDP340E

Reference

For information about loading pa- per, see "Loading Envelopes" in the Printer Reference on the CD-ROM labeled "Operating Instructions".

17