Ricoh AP2610N setup guide Maintenance Menu Parameters, Prt. Test Sheet, Adjustment, 115

Maintenance Menu

Maintenance Menu Parameters

Menu	Description
Image Density	You can select the print image density.
	-3 to 3

	Reference
	For more information, see p.97 “Adjusting the Image Densi-
	ty”.
Registration	❖ Prt. Test Sheet
	You can print the registration test sheet.
	Tray 1, Tray 2, Tray 3, Bypass Tray, Duplex backside

Note

❒Default : Tray 1

❒Only the installed trays appear on the panel display.

❖Adjustment

You can select the start position for printing on a page. Horiz.: Tray 1, Horiz.: Tray 2, Horiz.: Tray 3, Horiz.: Bypass, Horiz.: Dup.Back, Vert.: All Trays, Vert.: Dup.Back

-4 to 4

Note

❒ Default : Horiz.: Tray 1

❒ The registration value is not a default.

❒ Only the installed trays appear on the panel display.

	Reference
	For more information, see p.98 “Adjusting the Registration
	of the Trays”.
Curl Prevention	You can control the fuser temperature to prevent paper from curl-
	ing.

	Note
	❒ Default: Off
	❒ Use this mode only when paper misfeed occurs frequently
	during duplex printing.
ROM Update	This menu is not currently used.
HDD Format	After installing the Hard Disk Drive, format it.

Note

❒This menu appears only when the optional Hard Disk Drive is installed.

Reference

For more information about formatting the Hard Disk Drive, see p.119 “Formatting Hard Disk Drive Type 2600”.

6

115