Ricoh AP2610N setup guide Setting Up a Client Computer, Click Next

Setting Up a Client Computer

Setting Up a Client Computer

This section describes the procedures for setting up a client in a network that uses Windows 2000, Windows XP, Windows NT Server or Windows NT Work- station as a print server.

When using a Windows 2000, Windows XP or Windows NT print server, select a shared printer on Windows 2000, Windows XP or Windows NT.

Windows 2000, Windows XP or

Windows NT Print Server

3

Windows XP

Limitation

❒When using a print server connected to the printer with SmartNetMonitor for Client, you cannot use Recovery Printing and Parallel Printing.

Note

❒This section assumes that the client has already been configured to communi- cate with a Windows 2000, Windows XP or Windows NT print server. Do not begin the following procedure until the client has been set up and configured correctly.

Use the [Printers] window to set up the printer.

A Access the [Printers and Faxes] window from [Start] on the taskbar. B Click [Add Printer] in the Printer Tasks category.

This launches the Add Printer Wizard.

C Click [Next >].

D Click [[A network printer, or a printer attached to another computer.], and then click [Next >].

E Click [Next >].

35