ZyXEL Communications MES-2110 manual Saving Your Configuration, Set Up the Administrative Password

Chapter 5 The Web Configurator

Table 6 Navigation Panel Links (continued)

LINK	DESCRIPTION
Firmware	This link takes you to a screen where you can perform firmware
Download	maintenance.
Configurati	This link takes you to a screen where you can perform configuration file
on File	maintenance.
System Restart Menu
Restart	This link takes you to a screen where you can reboot the system.
Option
Save Settings	This link takes you to a screen where you can save the changes you have
	made on the MES-2110 and restart the MES-2110.

5.3.1 Set Up the Administrative Password

After you log in for the first time, it is recommended you set up an administrator password. Click Mgmt Config > User Config to display the next screen. Enter a password for the admin account and click Apply.

Figure 18 Configure Administrator Login Password

5.4 Saving Your Configuration

When you are done modifying the settings in a screen, click Apply to save your changes back to the run-time memory. Settings in the run-time memory are lost when the MES-2110’s power is turned off.

Click the Save Settings link in the navigation panel to save your configuration to nonvolatile memory. Nonvolatile memory refers to the MES-2110’s storage that remains even if the MES-2110’s power is turned off. If you don't use Save Settings all configuration changes will only apply until you restart the MES-2110.

Note: Use the Save Settings link when you are done with a configuration session.

Note: After saving changes to the IP Address, Subnet Mask or Gateway settings, the MES-2110 will need to reboot to put them into effect (after prompting you for confirmation.)

58

MES-2110 User’s Guide