ZyXEL Communications MES-2110 +n, show rmon port +1, all, rmon port +1+2+6

Chapter 23 Command Line Interface
MES-2110 User’s Guide
184
show dhcp static-binding Displays the DHCP static binding table.
show dhcp dynamic-binding Displays the DHCP dynamic binding table.
show dot1x global Displays 802.1x global information.
show dot1x radius-server Displays the 802.1x RADIUS server
configuration.
show dot1x port-control Displays the 802.1x port-control information.
show email-alarm Displays the email configuration.
show frame Displays the maximum frame size configuration.
show hdos Displays the Denial-of-Service configuration.
show igmp Displays the igmp configuration.
show interface Display detailed port information for all ports.
show LACP Displays LACP information.
show locked-mac Displays the locked MAC address learning status.
show logins Displays a list of recent logins.
show loop Displays the loop detection configuration.
show mac Displays the MAC table.
show mac-aging-time Displays the MAC aging time.
show mac-filter-table Displays the MAC filter table.
show mac-limit Displays the MAC limit table.
show mirror Displays the mirror configuration.
show mvr Displays multicast status, including the port
number, VLAN ID and multicast group members
on the switch. Optionally, displays the type of
each multicast VLAN.
show priority-override Displays the priority override status table.
show qinq-sp-tpid Displays the Server Provider Tag Prototol
Identifier.
show qos priority-mode Displays QoS priority-mode and IP-over-tag
settings.
show qos default-priority-queue Displays the QoS port priority.
show qos tag-priority-queue Displays the QoS tag priority.
show qos ip-tos-pri-queue Displays the QoS IP-TOS priority to queue
mapping.
show qos schedule Displays the QoS schedule type.
show rmon port [+n | all] Displays the device’s RMON information.
+n: Enter plus sign followed by port number to
display just that port’s information. For example,
show rmon port +1. You can also chain
multiple port numbers together, such as show
rmon port +1+2+6 (which displays information
for just ports 1, 2, and 6).
all: Displays RMON information for all ports.
Table 78 Privileged Commands
COMMAND DESCRIPTION