ZyXEL Communications MES-2110 manual 146, Ddhhmm

Chapter 19 IP Source Guard

new static binding replaces the original one. Click Configuration > DHCP Snooping > DHCP Binding Table to open the following screen.

Figure 67 Configuration > DHCP Snooping > DHCP Binding Table

The following table describes the labels in this screen.

Table 54 Configuration > DHCP Snooping > DHCP Binding Table

LABEL	DESCRIPTION
DHCP Binding Configuration
MAC Address	Enter the source MAC address in the binding.
IP Address	Enter the IP address assigned to the MAC address in the binding.
Port	Specify the port in the binding.
VLAN ID	Specify a VLAN ID if you want the MES-2110 to forward DHCP
	frames to DHCP servers on a specific VLAN.
	Leave the field blank if you do not want the MES-2110 to forward
	DHCP frames to a specific VLAN.
Undo	Click this to restore your last saved settings
Add	Click this to add the rule to the MES-2110.
Static/Dynamic Binding Table
No.	This field displays a sequential number for each binding.
Port	This field displays the port number in the binding.
VLAN ID	This field displays the source VLAN ID in the binding.
MAC Address	This field displays the source MAC address in the binding.
IP Address	This field displays the IP address assigned to the MAC address in
	the binding.
Delete	Click this to delete a static binding rule.
Lease Time	This field displays how many days, hours and minutes the binding
(DD:HH:MM)	is valid; for example, 02:03:04 means the binding is still valid for
	2 days, 3 hours and 4 minutes.

146

MES-2110 User’s Guide