Chapter 20 MAC

20.5 The MAC Limit Configuration Screen

Use this screen to limit the number of MAC addresses that can be learned on a port. Click Configuration > MAC Menu > MAC Limit Config to open the following screen.

Figure 74 Configuration > MAC Menu > MAC Limit Config

The following table describes the labels in this screen.

Table 59 Configuration > MAC Menu > MAC Limit Config

LABEL

DESCRIPTION

MAC Limit Function

Use this to enable or disable the MAC address limit feature.

 

 

Port

This is the port number.

 

 

Limit Quantity

Use this field to limit the number of (dynamic) MAC addresses

 

that may be learned on a port. For example, if you set this field to

 

"5" on port 2, then only the devices with these five learned MAC

 

addresses may access port 2 at any one time. A sixth device

 

would have to wait until one of the five learned MAC addresses

 

aged out. MAC address aging out time can be set in the MAC

 

Table Status screen.

 

 

Action

Enable the MAC limit function on this port. The MES-2110

 

forwards frames whose MAC address(es) is in the MAC address

 

table on this port. frames with no matching MAC address(es) are

 

dropped.

 

Disable the MAC limit function to forwards all frames on this port.

 

 

Undo

Click this to load your last saved settings.

 

 

Apply

Click Apply to save your changes to the ZyXEL Device’s run-time

 

memory. The ZyXEL Device loses these changes if it is turned off

 

or loses power, so use the Save Settings link in the navigation

 

panel to save your changes to the non-volatile memory.

 

 

156

MES-2110 User’s Guide

Page 156
Image 156
ZyXEL Communications MES-2110 manual MAC Limit Configuration Screen, 156, Dropped