ZyXEL Communications MES-2110 manual Dhcp Configuration Screen, Automatically

Chapter 6 System Details

The following table describes the labels in this screen.

Table 8 System Details > Board Info.

LABEL	DESCRIPTION
Hardware Version	This is the version number of the MES-2110’s hardware.
Firmware Version	This is the version number of the MES-2110’s current firmware
	including the date and time that the firmware is created.
Port Number	This shows the number of available ports on the MES-2110.

6.4 The DHCP Configuration Screen

Use this screen to turn on or off the DHCP client. Click System Details > DHCP Config to open the following screen.

Figure 22 System Details > DHCP Config

The following table describes the labels in this screen.

Table 9 System Details > DHCP Config

LABEL	DESCRIPTION
DHCP Client	Use this to turn the DHCP client on or off. Turn on the DHCP client
	if you have a DHCP server that can assign the MES-2110 an IP
	address, subnet mask and a default gateway IP address
	automatically.
DHCP Client State	This shows whether the DHCP client is Enabled or Disabled.
DHCP Leased Time	This is how long ago the MES-2110 got an IP address from a
	DHCP server (if DHCP client is enabled).
DHCP Expiry Time	This is how long there is to go before the MES-2110 will get a new
	IP address from a DHCP server (if DHCP client is enabled).
Undo	Click this to restore your last saved settings.
Apply	Click Apply to save your changes to the ZyXEL Device’s run-time
	memory. The ZyXEL Device loses these changes if it is turned off
	or loses power, so use the Save Settings link in the navigation
	panel to save your changes to the non-volatile memory.

MES-2110 User’s Guide

63