ZyXEL Communications MES-2110 manual 155

Chapter 20 MAC

The following table describes the labels in this screen.

Table 58 Configuration > MAC Menu > MAC Filter Config

LABEL	DESCRIPTION
MAC Filter Configuration
Status	Use this to determine whether to allow or deny traffic transmitted
	from the source MAC address.
Port	Select the port through which traffic from the source MAC address
	is transmitted.
Priority	Select a priority level from 0 to 7.
Pri-Override	Use this to ignore the priority level assigned to the transmitted
	frames.
MAC Address	Type a MAC address in valid MAC address format, that is, six
	hexadecimal character pairs.
Apply	Click Apply to save your changes to the ZyXEL Device’s run-time
	memory. The ZyXEL Device loses these changes if it is turned off
	or loses power, so use the Save Settings link in the navigation
	panel to save your changes to the non-volatile memory.
Allowed Table
Port	This is the port number through which traffic from the source MAC
	address is transmitted.
MAC Address	This is the source MAC address.
Priority	This shows the priority level.
Pri-Override	This shows whether priority level override is enabled or disabled.
Delete	Click this to remove the rule.
Page Up/Down	Click this to view the previous or next page.
Denied Table
Apply	Click Apply to save your changes to the ZyXEL Device’s run-time
	memory. The ZyXEL Device loses these changes if it is turned off
	or loses power, so use the Save Settings link in the navigation
	panel to save your changes to the non-volatile memory.
MAC Address	This is the source MAC address.
Delete	Click this to remove the rule.
Page Up/Down	Click this to view the previous or next page.

MES-2110 User’s Guide

155