ZyXEL Communications MES-2110 manual 185, Permanently save any changes you, Command line interface

	Chapter 23 Command Line Interface
Table 78 Privileged Commands
COMMAND	DESCRIPTION
show rstp	Displays the RSTP configuration.
show sfp ddmi port <port-number>	Displays the SFP fiber port DDMI information for
	the specified port.
show sfp serial-no port <port-number>	Displays the SFP serial number for the specified
	port.
show sfp vendor port <port-number>	Displays the SFP vendor name for the specified
	port.
show snmp	Displays the snmp configuration.
show sntp	Displays the SNTP configurations.
show sntp-timezone	Displays a list of time zones and their GMT offset.
show storm-control	Displays the storm control configuration.
show syslog [<begin:end>]	Displays all syslog messages.
	You can also specify a range of syslog messages.
	begin: Enter the first syslog message to display.
	end: Enter the last syslog message to display.
show syslog-config	Displays the syslog configuration.
show version	Displays the system version.
show vlan port-base	Displays the port-base VLAN.
show vlan stacking	Displays the VLAN stacking status.
show vlan tag-base management-VLAN	Displays the VLAN for the management switch.
show vlan tag-base vlan-id	Displays the tag-base VLAN ID.
show vlan tag-base port-info	Displays the tag-base port information.
show vlan tag-base vlan-table	Displays tag-base VLAN table.
show vlan type	Displays the VLAN type.
write memory	Saves the current configuration, including all
	changes made since the last save, to flash.
	Note: You must use this command to
	permanently save any changes you
	make while using the MES-2110
	command line interface.

MES-2110 User’s Guide

185