ZyXEL Communications MES-2110 132, Group Configuration, Drop-down list box, MVR Group Status

Chapter 17 IGMP

Note: A port can belong to more than one multicast VLAN. However, IP multicast group addresses in different multicast VLANs cannot overlap.

Figure 60 Configuration > IGMP Menu > MVR > Group Configuration

The following table describes the labels in this screen.

Table 50 Configuration > IGMP Menu > MVR > Group Configuration

LABEL	DESCRIPTION
Group Configuration
Multicast	Select a multicast VLAN ID (that you configured in the MVR screen) from
VLAN ID	the drop-down list box.
Group ID	Enter a group number for identification purposes.
Start	Enter the starting IP multicast address of the multicast group in dotted
Address	decimal notation.
	Refer to Section 17.1.1 on page 123 for more information on IP multicast
	addresses.
Quantity	Specify the number of IP addresses to include in the multicast group.
Undo	Click this to load your last saved settings.
Add	Click Add to save your changes to the MES-2110’s run-time memory. The
	MES-2110 loses these changes if it is turned off or loses power, so use the
	Save link on the top navigation panel to save your changes to the non-
	volatile memory when you are done configuring.
MVR Group Status
MVLAN	This field displays the multicast VLAN ID.
Group ID	This field displays the ID number that identifies the multicast group.
Address	This field displays the starting IP address of the multicast group.
Delet All	Select the check box and click the Delete button to remove all configured
	rules.
Delete	Select the check box in the Delete Group field and click Delete to remove
Group	the selected entry(ies) from the table.
Undo	Select this to clear the checkbox(es) in the table.

132

MES-2110 User’s Guide