ZyXEL Communications MES-2110 manual 106, Spvid

Chapter 12 VLAN

Table 34 Configuration > VLAN Menu > Tag-Based > VLAN Stacking

LABEL	DESCRIPTION
SPVID	SPVID is the service provider’s VLAN ID (the outer VLAN tag).
	Enter the service provider ID (from 1 to 4094) for frames received
	on this port.
Priority	On the MES-2110, configure priority level of inner IEEE 802.1Q
	tag in the Configuration > QoS Menu > 802.1p Priority
	screen.
	"0" is the lowest priority level and "7" is the highest.
Undo	Click this to restore your last saved settings.
Apply	Click Apply to save your changes to the MES-2110’s run-time
	memory. The MES-2110 loses these changes if it is turned off or
	loses power, so use the Save Settings link in the navigation
	panel to save your changes to the non-volatile memory when you
	are done configuring.
VLAN Stacking Status
Port1-10	This is the port number.
Active	This shows whether VLAN stacking is enabled or disabled on the
	MES-2110.
SP TPID	This is the service provider VLAN tag.
Role	This shows how the port process transmitted frames.
SPVID	This is the service provider ID for frames received on this port.
Priority	This shows the priority level of frames transmitted through the
	port.

106

MES-2110 User’s Guide