ZyXEL Communications MES-2110 manual P2P

Chapter 11 Bridge

Table 27 Configuration > Bridge Menu > RSTP Per Port Config

LABEL	DESCRIPTION
Edge	Select On when the port is connected to an end node (a computer
	network card for example).
	Select Off when the port is connected to a bridge node.
P2P	Select On when the port is connected to one bridge as a Point-to-
	Point link type.
	Select Off when the port is connected to multiple bridges as a
	Shared Medium link type.
	Select Auto to have the MES-2110 automatically determine the
	link type.
Undo	Click this to restore your last saved settings.
Apply	Click Apply to save your changes to the MES-2110’s run-time
	memory. The MES-2110 loses these changes if it is turned off or
	loses power, so use the Save Settings link in the navigation
	panel to save your changes to the non-volatile memory when you
	are done configuring.
Port	This indicates the port index number.
Type	This indicates the cable type connected to the port.
Priority (1~255)	This indicates the port priority.
Cost (1~65535)	This indicates the path cost for the port.
Edge	This indicates whether the port is connected to an end node (On)
	or a bridge node (Off).
P2P	This indicates whether the port is connected to one bridge (On),
	multiple bridges (Off), or if the connection type is determined
	automatically (Auto).
Port Status	This indicates whether the port is Forwarding or Blocking frame
	transmission.
Port Role	This indicates the port behavior as a Disabled, Alternate,
	Backup, Root, Designated or NonStp port.

96

MES-2110 User’s Guide