Chapter 23 Command Line Interface

Table 80 Configuration Mode Commands

 

 

COMMAND

DESCRIPTION

 

no dhcp smart-relay option

Disables the DHCP smart relay option.

 

no dhcp smart-relay vlan <crrange>

Sets the DHCP smart relay to exclude VLANs.

 

 

cr: Leave this field blank and press [Enter] to

 

 

use the default setting.

 

 

range: Specify a range of VLAN IDs.

 

no dhcp snooping enable

Disables DHCP snooping.

 

no dhcp smart-relay exlude-vlan <1-4094>

Sets the DHCP smart relay to include the

 

 

previously excluded specified VLAN.

 

 

 

 

no dhcp snooping option

Disables the DHCP snooping option.

 

no dhcp snooping vlan <1-4094>

Disables the specified DHCP snooping VLAN ID.

 

no dot1x global

Stops 802.1x running globally

 

no dot1x guest-vlan

Disables Guest VLAN.

 

no gateway

Sets the device’s default gateway.

 

no igmp immediate-leave

Sets IGMP fast leave to its default value.

 

no igmp query-mode <vlan-id>

Sets IGMP query mode to its default type for the

 

 

specified VLAN ID.

 

 

 

 

no igmp snooping

Disables IGMP snooping.

 

no igmp static

Disables the IGMP static port.

 

no igmp vlan <1-4094>

Disables IGMP VLAN for the specified VLAN ID.

 

no ip

Sets the device to its default IP address.

 

 

Note: You cannot change the device’s IP

 

 

address over Telnet.

 

 

 

 

no lacp

Disables LACP.

 

no logins

Resets the login password to NULL.

 

no mvr <1-4094>

Removes an MVR configuration from the

 

 

specified VLAN.

 

 

 

 

no netmask

Sets the default netmask.

 

no spanning-tree

Disables the spanning tree.

 

no trunk <group-id>

Disables the trunk group.

 

no vlan <2-4094>

Deletes the static VLAN entry.

 

no vlan-stacking

Disables VLAN stacking.

 

qinq-sp-tpid <tpid>

Sets the SP TPID. SP TPID is a standard

 

 

Ethernet type code identifying the frame and

 

 

indicating whether the frame carries IEEE

 

 

802.1Q tag information.

 

 

tpid: Enter the Server Provider Tag Protocol

 

 

Identifier. This can be a four-digit hexadecimal

 

 

number from 0000 to ffff. The default is 9100.

 

 

 

 

qos schedule all_high_before_low

Sets the QoS schedule to all high before low.

 

qos schedule weighted_round_robin

Sets the QoS to weighted round_robin.

 

MES-2110 User’s Guide

191

Page 191
Image 191
ZyXEL Communications MES-2110 manual 191, Address over Telnet