ZyXEL Communications MES-2110 manual 192

Chapter 23 Command Line Interface

Table 80 Configuration Mode Commands

COMMAND	DESCRIPTION
qos ip-dscp-pri-queue <0~63>	Sets the QoS IP IP-DSCP Priority to queue
<lownormalpreferredhigh>	mapping. The default is low.
qos tag-pri-queue <0-7>	Set the QoS tag priority to queue mapping.
<lownormalpreferredhigh>
rmon clear	Clears the RMON information for ports 1~10.
snmp contact <contact-name>	Sets the SNMP system contact name.
	contact-name: Enter up to 80 characters.
snmp getcommunity <community-name>	Sets the SNMP GET community.
	community-name: Enter up to 30 characters.

		Note: Only for SNMP v2c or lower.
snmp	location <location-name>	Sets the SNMP system location.
		location-name: Enter up to 80 characters.
snmp	setcommunity <community-name>	Sets the SNMP SET community.
		community-name: Enter up to 30 characters.

	Note: Only for SNMP v2c or lower.
snmp trapcommunity <index> <community-	Sets the SNMP trap community.
string>	index: Enter an index number (1~5).
	community-string: Enter up to 30
	characters.
snmp trapenable <index> <enabledisable>	Enables the SNMP trap.
	index: Enter an index number (1~5).
snmp trapip <index> <ip-address>	Sets the IP addresses of up to 5 SNMP
	managers to receive SNMP traps.
	index: Enter an index number (1~5).
sntp <enable disable>	Enables and disables SNTP support.
sntp-NTP-primary-server <ip address>	Set SNTP primary server's IP address.
sntp-NTP-secondary-server <ip address>	Set SNTP secondary server's IP address.
sntp poll_interval <value>	Sets the interval in specified hours between
	SNTP requests.
sntp time <yyyy:mo:dd:hh:mm:ss>	Sets the local time by year (yyyy), month (mm),
	day (dd), hour (hh), minutes (mm), and
	seconds (ss).
sntp timezone <+hh.mm -hh.mm>	Sets the timezone offset.
	+hh.mm: Increases the timezone offset by the
	specified hours (hh) and minutes (mm).
	-hh.mm: Increases the timezone offset by the
	specified hours (hh) and minutes (mm).

192

MES-2110 User’s Guide