ZyXEL Communications MES-2110 manual Guest Vlan, Reauthenticat

Chapter 10 802.1x

Table 17 Configuration > Port Configuration (continued)

LABEL	DESCRIPTION
Guest VLAN	You can configure this if you have enabled the guest VLAN feature in the
	Configuration > Global Configuration screen (see Section 10.2 on
	page 79).
	Select Enable then enter the number that identifies the Guest VLAN.
	Make sure this is the Guest VLAN recognized in your network.
	Clients belonging to the guest VLAN can access unprotected areas in your
	network, such as the Internet.
	Select Disable if you do not want to use this feature.
Reauthenticat	Enable this if a subscriber has to periodically re-enter his or her username
ion	and password to stay connected to the port.
Reauth-Period	Specify how often (in minutes) a client has to re-enter his or her
(1-999999)	username and password to stay connected to the port.
	Default is 3600 minutes (or 1 hour).
Port	This indicates the port number.
Active	This indicates whether 802.1x authentication is enabled or disabled for
	this port.
Guest VLAN	This indicates whether Guest VLAN is enabled or disabled for this port.
Reauthenticat	This indicates whether Reauthentication is enabled or disabled for
ion	this port.
Reauth-Period	This indicates the Reauth-Periodfor the this port.
(1-999999)
Undo	Click this to restore your last saved settings.
Apply	Click Apply to save your changes to the MES-2110’s run-time memory.
	The MES-2110 loses these changes if it is turned off or loses power, so
	use the Save Settings link in the navigation panel to save your changes
	to the non-volatile memory when you are done configuring.

82

MES-2110 User’s Guide