ZyXEL Communications MES-2110 manual 200

Chapter 23 Command Line Interface

Table 83 Interface Mode Commands

COMMAND	DESCRIPTION
frame-type <fallbackchecksecure>	Sets the port frame type for the current port(s).
	You can choose to accept both non-member and
	untagged incoming frames (fallback), just
	untagged incoming frames (check) or drop all
	non-member and untagged incoming frames on
	a port (secure).
	fallback: Accepts incoming frames
	(nonmember forward/untag forward).
	check: Accepts incoming frames (nonmember
	drop/untag forward).
	secure: Accepts incoming frames (nonmember
	drop/untag drop).
isolate	Isolates the specified prots. Isolated ports
	belonging to the same VLAN do not
	communicate with each other.
lock-mac	Locks the MAC configuration for the current
	port(s).
mac-limit action <enabledisable>	Enables or disables the MAC limit for the current
	port(s).
mac-limit quantity <1-20>	Sets the MAC limit quantity for the current
	port(s).
mirror	Enables port mirroring for the current port(s).
name <string>	Sets a name for the port for the current port(s).
	string: Enter up to 15 characters.
no abnormal	Disables individual port detection for the current
	port(s).
no active	Disables the current port(s).
no arp-inspection-trust	Disables ARP inspection trust for the current
	port(s).
no bandwidth-limit egress	Disables egress rate for the current port(s).
no bandwidth-limit ingress	Disables ingress rate for the current port(s).
no dhcp snooping trust	Disables DHCP snooping trust for the current
	port(s).
no flow-control	Disables flow control on the interface for the
	current port(s).
no auto-negotiation	Disables auto-negotiation. for the current
	port(s).
no isolate	Disables port isolation for the current port(s).
no lock-mac	Disables MAC locking for the port for the current
	port(s).
no mirror	Disables port mirroring for the current port(s).
no broadcast-limit	Disables the broadcast packet limit for the
	current port(s).

200

MES-2110 User’s Guide