ZyXEL Communications MES-2110 manual Basic Commands, 182

Chapter 23 Command Line Interface

23.5 Basic Commands

Basic commands are in all modes.

When in Basic mode, the command prompt is as follows:.

MES-2110>

The following is a list of available Basic commands:

Table 77 Basic Commands

COMMAND	DESCRIPTION
exit	In Basic mode, this disconnects you from the
	device (identical to logout).
	In other modes (such as Privileged), this returns
	you to the previous mode.
help	Lists available commands.
history	Displays a list of previously run commands.
logout	Disconnects from the device.
ping <-n count> <-l length> <-t> <-w	Pings the specied IP address.
timeout> <ip-address>	You can use the following parameters:
	-n count: Determines the number of echo
	requests to send. The default is 4.
	-l length: Adjusts the size of the ping packet
	by the number of specified bytes (64~8148).
	-t: Pings the specified host until the break
	(ESC) key is pressed.
	-w timeout: Adjusts the timeout duration for
	the ping packet in milliseconds. The default is
	1,000 milliseconds.
show ip	Displays the device’s network configuration.
show system-information	Shows the device’s system configuration.

182

MES-2110 User’s Guide