ZyXEL Communications MES-2110 manual Arp

	Chapter 5 The Web Configurator
Table 6 Navigation Panel Links (continued)
LINK	DESCRIPTION
Bandwidth	This link takes you to a screen where you can configure bandwidth limits
Control	on the MES-2110.
Storm	This link takes you to a screen to set up broadcast filters.
Control
Port	This link takes you to a screen where you can copy traffic from one port
Mirroring	or ports to another port in order that you can examine the traffic from
	the first port without interference.
Trunk	This link takes you to screens where you can logically aggregate physical
Config	links to form one logical, higher-bandwidth link.
IGMP Menu	This link takes you to screens where you can configure various multicast
	features, IGMP snooping and create multicast VLANs.
DHCP	This link takes you to screens where you can configure filtering of
Snooping	unauthorized DHCP frames in your network.
ARP	This link takes you to a screen where you can configure filtering of
Inspection	unauthorized Address Resolution Protocol (ARP) frames in your network.
MAC Menu	This link takes you to screens where you can configure the following
	settings:
	• configure IEEE 802.1x port authentication as well as MAC
	authentication for clients communicating via the MES-2110,
	• activate MAC address learning and set the maximum number of MAC
	addresses to learn on a port,
	• view the MAC addresses (and types) of devices attached to what
	ports.
QoS Menu	This link takes you to screens where you can configure priority levels for
	traffic transmitted through each port.
Mgmt Config
Serial Port	This link takes you to a screen where you can configure the parameters
Config	for connections via the console port.
SNMP	This link takes you to screens where you can configure settings for date
Config	and time.
SNTP	This link takes you to a screen where you can configure SNTP and date/
	time settings.
Email	This link takes you to screens where you can set up system logs and e-
Alarm &	mail the logs to you.
SYSLog
User Config	This link takes you to a screen where you can set up administrative and
	user accounts for people to use the MES-2110.
Cable Test	This link takes you to a screen where you can test the cable connection
	on each port.
Host	This link takes you to a screen where you can allow trusted computers to
Denial-of-	access the MES-2110 via remote management.
Service
Protection
Port	This link takes you to a screen where you can configure the MES-2110 to
Abnormal	detect abnormal traffic transmission and temporarily or permanently
Traffic	block traffic transmission through a port.
Detection

MES-2110 User’s Guide

57