ZyXEL Communications MES-2110 manual MVR Group Configuration, 131

	Chapter 17 IGMP
Table 49 Configuration > IGMP Menu > MVR (continued)
LABEL	DESCRIPTION
Port	This field displays the port number on the MES-2110.
Source Port	Select this option to set this port as the MVR source port that sends and
	receives multicast traffic. All source ports must belong to a single
	multicast VLAN.
Receiver Port	Select this option to set this port as a receiver port that only receives
	multicast traffic.
None	Select this option to set the port not to participate in MVR. No MVR
	multicast traffic is sent or received on this port.
Tagging	Select this checkbox if you want the port to tag the VLAN ID in all
	outgoing frames transmitted.
All Port	Use this to select between Source Port, Receiver Port or None.
Tagging	Select this checkbox if you want the ports to tag the VLAN ID in all
	outgoing frames transmitted.
Undo	Click this to load your last saved settings.
Apply	Click Apply to save your changes to the MES-2110’s run-time memory.
	The MES-2110 loses these changes if it is turned off or loses power, so
	use the Save Settings link in the navigation panel to save your changes
	to the non-volatile memory when you are done configuring.
MVR Status
VLAN	This field displays the multicast VLAN ID.
Active	This field displays whether the multicast group is enabled or not.
Query Mode	This field displays whether the query mode is enabled or not.
Name	This field displays the descriptive name for this setting.
Mode	This field displays the MVR mode.
Source Port	This field displays the source port number(s).
Receiver Port	This field displays the receiver port number(s).
Tagging Port	This field displays which port tags outgoing frames with the VLAN ID.
Delete	To delete a multicast VLAN(s), select the rule(s) that you want to
	remove in the Delete column, then click the Delete button.
Undo	Click this to clear the Delete check boxes.

17.6 MVR Group Configuration

All source ports and receiver ports belonging to a multicast group can receive multicast data sent to this multicast group.

Configure MVR IP multicast group address(es) in the Group Configuration screen. Click Group Configuration in the MVR screen.

MES-2110 User’s Guide

131