ZyXEL Communications MES-2110 manual 162, Configuration QoS Menu IP Dscp Priority

Chapter 21 QoS

Use this to assign DSCP priority settings. Click Configuration > QoS Menu > IP DSCP Priority to open the following screen.

Figure 78 Configuration > QoS Menu > IP DSCP Priority

The following table describes the labels in this screen.

Table 63 Configuration > QoS Menu > IP DSCP Priority

LABEL	DESCRIPTION
Number	Enter the DSCP classification identification number (0-63).
Priority	Assign a MES-2110’s priority level (Low, Normal, Preferred or
	High) to the DSCP value.
Undo	Click this to load your last saved settings.
Apply	Click Apply to save your changes to the ZyXEL Device’s run-time
	memory. The ZyXEL Device loses these changes if it is turned off
	or loses power, so use the Save Settings link in the navigation
	panel to save your changes to the non-volatile memory.

162

MES-2110 User’s Guide