ZyXEL Communications MES-2110 manual 171, Syslog

Chapter 22 Mgmt Config and System Restart Menu

The following table describes the labels in this screen.

Table 69 Mgmt Config > Email Alarm & SYSLog Config

LABEL	DESCRIPTION
Email Alarm Configuration
Email Alarm	Use this to enable or disable the e-mail alarm system.
Mail Server IP	Enter the server name or the IP address of the mail server for the
	e-mail addresses specified below. If this field is left blank, logs
	and alerts messages will not be sent via e-mail.
From	Assign a valid e-mail address to the MES-2110.
To	The MES-2110 sends logs to the e-mail addresses specified in this
	field. If this field is left blank, the MES-2110 does not send logs
	via e-mail.
SYSLOG
SYSLOG Status	Use this to enable or disable syslog logging.
Backup	Click this save syslog file to a TFTP server.
Show	Click this to show a complete list of syslog messages.
Alarm Type	Select the categories of alarm that you want to record and send
	an e-mail alarm.
Undo	Click this to restore your last saved settings.
Apply	Click Apply to save your changes to the ZyXEL Device’s run-time
	memory. The ZyXEL Device loses these changes if it is turned off
	or loses power, so use the Save Settings link in the navigation
	panel to save your changes to the non-volatile memory.

MES-2110 User’s Guide

171