ZyXEL Communications MES-2110 manual General MVR Configuration, 129

Chapter 17 IGMP

an entry is created in the forwarding table on the MES-2110. This maps the subscriber VLAN to the list of forwarding destinations for the specified multicast traffic.

When the subscriber changes the channel or turns off the computer, an IGMP leave message is sent to the MES-2110 to leave the multicast group. The MES- 2110 sends a query to VLAN 1 on the receiver port (in this case, a DSL port on the MES-2110). If there is another subscriber device connected to this port in the same subscriber VLAN, the receiving port will still be on the list of forwarding destination for the multicast traffic. Otherwise, the MES-2110 removes the receiver port from the forwarding table.

Figure 58 MVR Multicast Television Example

17.5 General MVR Configuration

Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source port for each multicast VLAN. Click Configuration > IGMP Menu > MVR link to display the screen as shown next.

Note: You can create up to three multicast VLANs and up to 256 multicast rules on the MES-2110.

MES-2110 User’s Guide

129