NetWare 4.x, 5/5.1 - Advanced Settings

C In the [Printer name] box, type the name of the printer.

DSelect the [Define additional properties] check box, and then click [Create].

N Assign print queues to the created printer as follows:

AClick [Assignments], and then click [Add] in the [Assignments] group.

BIn the [Available objects] box, click the queue created in step L, and then click [OK].

CClick [Configuration], and in the [Printer type] box, select [Parallel] using the drop-down menu, and then click [Communication].

DClick [Manual load] in the [Communication type] group, and then click [OK].

EAfter checking the settings, click [OK].

O Create a print server as follows:

A Select the context specified using the NIB Setup Tool (Step I-A), and on the [Object] menu, click [Create].

B In the [Class of new object] box, click “Print Server”, and then click [OK].

5

When you are using NetWare 5/5.1, click “Print Server (Non NDPS)”.

C In the [Print Server name] box, type the name of the print server.

Important

Use the same name as that specified using the NIB Setup Tool. (Step H).

DSelect the [Define additional properties] check box, and then click [Create].

P Assign the printer to the created print server as follows.

AClick [Assignments], and then click [Add] in the [Assignments] group.

BIn the [Available objects] box, click the queue created in the step M, and then click [OK].

CIn the [Printers] group, click the printer assigned in step B , and then click [Printer Number].

DType the printer number and click [OK].

Important

Use the same number as that specified as Remote Printer No. using the NIB Setup Tool. (Step I-E).

EAfter checking the settings, click [OK].

Q Start the print server by typing the following from the console of the Net- Ware Server.

If it is running, restart it after exiting it.

To exit

CAREE: unload pserver

To start

CAREE: load pserver print_server_name

67

Page 357
Image 357
Ricoh AP2610N setup guide To exit