Ricoh AP2610N setup guide 114

Appendix

	Message	Description and Solutions
	Cannot find rprinter (<print server	The printer having the number displayed on
	name>/<printer number>)	the print server does not exist. Make sure that
		the number of the printer is registered in the
		print server.
	Change IP address from DHCP Server.	The IP address changes when DHCP LEASE is
		renewed. To always assign the same IP ad-
		dress, set a static IP address to the DHCP serv-
		er.
	child process exec error! (process name)	Failed to start the network service. Turn the
		printer off and then on. If this does not work,
		contact your service or sales representatives.
	Connected DHCP Server(<DHCP server ad-	The IP address was successfully received from
	dress>).	the DHCP server.
	connection from <IP address>	Logged on from the host <IP address>.
	Could not attach to FileServer<error number>	(In remote printer mode) Cannot attach to the
		file server. For some reason, the file server
		refuses the connection. Check the file server
		configuration.
	Could not attach to PServer<print server>	(In remote printer mode) Cannot attach to the
		print server. For some reason, the print server
		refuses the connection. Check the print server
		configuration.
7
	Current Interface Speed:xxxMbps	The speed of the network (10 Mbps or 100 Mb-
		ps).
	Current IP address <current IP address>	The IP address <current IP address> was re-
		ceived from the DHCP server.
	Current IPX address<IPX address>	The current IPX address.
	DHCP lease time expired.	DHCP lease time has expired. The printer tries
		to discover the DHCP server again. The IP ad-
		dress used up to now becomes invalid.
	DHCP server not found.	The DHCP server cannot be found. Make sure
		the DHCP server is running on the network.
	dhcpcd start.	A dhcpcd (DHCP client service) has started.
	Duplicate IP=<IP address>(from <MAC ad-	The same IP address is used. An IP address
	dress>).	must be unique. Check the address of the de-
		vice indicated in <MAC address>.
	Established SPX Connection with PServer,	(In remote printer mode) A connection with
	(RPSocket=<socket number>, connID=	the print server has been established.
	<connection ID>)
	exiting	lpd service has ended and the system is exiting
		the process.

114