Ricoh AP2610N Replacing the Paper Feed Rollers, Insert the new friction pad in the paper tray

Appendix

E Use a sharp-pointed item like a ball-point pen, to release the two catches that lock the friction pad.

ZCEM170J

F Return the paper tray to its origi- nal position, and remove the fric- tion pad from the tray.

7

ZCEM180J

G Insert the new friction pad in the paper tray.

Attach the center projection of the new friction pad to the spring and align the projection of both sides of the friction pad to the holes of the paper tray. Then push the friction pad as shown in the illustration until it clicks.

146 ZCEM190J

H Push the friction pad until it locks securely.

I If your printer is equipped with the optional Paper Feed Unit(s), follow the same procedure when replacing the friction pad.

Replacing the Paper Feed Rollers

Replace all feed rollers including the printer and the optional Paper Feed Unit(s). The following procedure shows how to replacing the paper feed rollers of the printer.

RCAUTION:

•When lifting the machine, use the inset grips on both sides. Otherwise the printer could break or cause injury if dropped.

A Move the printer to the edge of a sturdy and stable table or desk.

ZGDM110J

Important

❒Be sure to move the printer hor- izontally. Moving the printer facing up on down may cause the toner to scatter.

❒Do not put the printer on an un- stable or tilted surface.