Ricoh AP2610N setup guide Configuring the Printer, Changing the Printer Name, Changing the Zone

Macintosh Configuration

Configuring the Printer

Use the control panel to activate the EtherTalk protocol. (The default is active.)

Reference

For more information about configuration, see the Setup Guide.

Changing the Printer Name

If the network has several similar model printers, the names will be the same. Printers that have the same name will have their names slightly changed in the Chooser. For example, three printers named “printer” will appear in the chooser as “printer0”, “printer1” and “printer2”.

To change the printer name in the Macintosh EtherTalk environment, use the Printer Utility for Mac included on the CD-ROM labeled “Printer Drivers and Utilities”.

	Changing the Zone
6
	To change the zone configuration in the Macintosh EtherTalk environment, use
	the Printer Utility for Mac included on the CD-ROM labeled “Printer Drivers
	and Utilities”.

Reference

For more information about using Printer Utilities for Mac, see PostScript 3 Supplement provided as a PDF file on the CD-ROM labeled “Operating In- structions”.

72