Ricoh AP2610N Setting Up a Client Computer, Click Network printer server and click Next

Setting Up a Client Computer

Setting Up a Client Computer

This section describes the procedures for setting up a client in a network that uses Windows 2000, Windows XP, Windows NT Server or Windows NT Work- station as a print server.

When using a Windows 2000, Windows XP or Windows NT print server, select a shared printer on Windows 2000, Windows XP or Windows NT.

Windows 2000, Windows XP or

Windows NT Print Server

4

Windows NT 4.0

Limitation

❒When using a print server connected to the printer with SmartNetMonitor for Client, you cannot use Recovery Printing and Parallel Printing.

Note

❒This section assumes that the client has already been configured to communi- cate with a Windows 2000, Windows XP or Windows NT print server. Do not begin the following procedure until the client has been set up and configured correctly.

Use the [Printers] window to set up the printer.

A Click [Start], point to [Settings], and then click [Printers].

B Double-click the [Add Printer] icon.

This launches the Add Printer Wizard.

C Click [Network printer server] and click [Next >].

D In the [Shared Printers] box, double-click the name of the computer used as a print server.

The printers attached to the network are displayed.

47