Ricoh AP2610N setup guide Setting Up the Printer Driver, Select the printer

Using SmartNetMonitor for Client

D After the confirmation message, click [Yes].
E Acknowledge the [Question] dialog box.
F When the uninstallation is complete, click [OK].	1

Setting Up the Printer Driver

The following procedure allows you to configure the printer port to use Smart- NetMonitor for Client.

Preparation

The target printer must be turned on before starting the installation process.

A Install the printer driver of the printer you want to use.

B From the [Printers] window, click the icon of the printer. On the [File] menu, click [Properties].

C Click the [Details] tab and click [Add Port].

D Click [Other], click [SmartNetMonitor] from the list, and then click [OK]. The [Select Printer] dialog box appears .

The displayed items are as follows:

Model Name: The model name of the printer.

Name: The name of the Network Interface Board.

Comment: Additional information about the Network Interface Board.

Address: The IP address of the printer.

E Select the printer.

TCP/IP

A Click the printer you want to use, and then click [OK].

Note

❒Printers that respond to an IP broadcast from the computer will be dis- played. To print to a printer not listed here, click [Specify Address], and then type the IP address or host name.

❒You cannot add an address partially similar to that already used. For ex- ample, when “192.168.0.2” is already used, “192.168.0.2xx” cannot be used. Similarly, when “192.168.0.20” is already used, “192.168.0.2” can- not be used.

7